How do i: Use this seafoam..

Midgear · 08-10-2006, 08:56 PM

Ok, so i bought some seafoam for a grand total of 7 bucks and 76 cents.. took it home and had no idea where my PCV valve was, talked to BlackJack and he pointed it out, so i went out to pluck it off and suck up some of this seafoam, and i can't get to the pcv valve, its smothered underneath other wires / tubes and i cant move it.. where is the Brake Booster line? can someone post a picture on where this thing is.. ive searched and cant find anything.. I really dont want to move all those other hoses and wires out of the way to remove the PCV valve.. id rather leave them where they are

pics welcome..

j{}n · 08-21-2006, 01:26 AM

yeah, if someone could post pics of where to put this stuff (along with some steps), it would be awesome

siether · 08-22-2006, 02:55 PM

I third the notion, where and how.

Redog · 08-23-2006, 05:09 AM

I bought a fuel cleaner called "CLEAN" at NAPA for my Delta when I first bought it. It would always stall out. After doing this (just added bottle to tank) it would sputter, but not stall.

Of course, replacing the 21 year old fuel filter worked a lot better, but that tells you how well it works.

Kchav · 10-04-2014, 01:51 PM

I just put half in my crank case and half in the gas tank as for putting it anywhere else i dont quite think its recommended but i have no idea.

Fabian_7s · 10-05-2014, 03:29 AM

I would probably recomend the seafam in a spray can for vacuum lines instead just because its alot easier to control without worrying about it turning your engine off everytime you accidently pour too much into the line

Papa Rad17 · 10-05-2014, 11:10 PM

I have seafoamed all my cars via the vacuum line. Either no difference on pretty clean motors or some dirty ones I've done it had helped noticeably. pore 1/3 of a can in the vacuum line going into your brake booster. follow instructions on the can.