pinstripe

Papa Rad17 · 02-03-2012, 01:39 AM

well first of all, my finger nails are still sore from pulling it off

however I will say yes, the blow drier does help a TON. but there are a few spots that refuse to come off no matter what I do. they are in the same area on the driver and passenger sides. the rest of the pin striping was raised a little, you could clearly tell it was there and could get a fingernail under it to pull off. the little bits left in the pics are completely smooth, cant feel them at all and are not as dark colored as the rest. after a few hours iv decided they are not going to come off. iv tried scrubbing, fingernail polish remover, and paint thinner (no, i wasnt an idiot with it, the paint is fine) and it will not come off. what else can i try?

Gr1m · 02-03-2012, 01:42 AM

not much u can do besides wetsand that and hope for the best

Papa Rad17 · 02-03-2012, 01:45 AM

Quote:

Originally Posted by Gr1m

not much u can do besides wetsand that and hope for the best

thats what i was afraid of

I have a can of color match paint on the shelf if it doesnt go as planned.

sleepyalero · 02-03-2012, 02:20 AM

i was gonna say nail polish remover. but you said you already tried it.

Papa Rad17 · 02-03-2012, 03:07 AM

Yup. And paint thinner, I was told they would "melt off" with it, but it didn't phase it at all.

sleepyalero · 02-03-2012, 03:25 AM

thats weird. what about goo-gone ?

Papa Rad17 · 02-03-2012, 03:52 AM

Quote:

Originally Posted by sleepyalero

thats weird. what about goo-gone ?

Nope. I made a special trip to get it the night I first ran into the problem. It didn't do a thing.

mmorello82 · 02-03-2012, 05:30 AM

3M Makes a Pinstripe Remover. It looks like a round eraser that goes on the end of a drill. You can find it at Wal-Mart or parts stores and it works great!

bdyman · 02-03-2012, 10:45 PM

^^^^ well someone has their brain plugged in tonight
if that doesnt work, doesnt it feel like the stripe was cleared over, if its a yes your effed, would have to be sanded off and the panles repainted
if the earser wheel takes it off then no more problems

billytheman1188 · 02-03-2012, 11:05 PM

Quote:

Originally Posted by bdyman

^^^^ well someone has their brain plugged in tonight

Waste of money buying an eraser wheel for a little pinstripe....totally unnecessary. A little heat and elbow grease works just fine.....then clean the area and polish....DONE.

buy an eraser wheel...

smh.... unless you plan on taking pinstripes off of all your friends and families cars then its pointless.

Papa Rad17 · 02-04-2012, 02:52 PM

like i was saying, heat and elbow grease arent working on this like the rest. Iv spent t total of like 2 hours working on them. im about to start sanding the

things

a.graham52 · 02-04-2012, 03:05 PM

eraser wheel. buy one. you will have one when you need it later. worth the money. BUY ONE

bdyman · 02-05-2012, 02:23 AM

Quote:

Originally Posted by billytheman1188

Waste of money buying an eraser wheel for a little pinstripe....totally unnecessary. A little heat and elbow grease works just fine.....then clean the area and polish....DONE.

buy an eraser wheel...

smh.... unless you plan on taking pinstripes off of all your friends and families cars then its pointless.

billy,billy,billy you have much to learn my young apprentice, work smarter not harder, buy the effin easer wheel, unless ya want your fingers to burn and hurt from rubbing and the heat gun
its 20 bucks, so buy the wheel

billytheman1188 · 02-05-2012, 02:47 AM

Quote:

Originally Posted by bdyman

billy,billy,billy you have much to learn my young apprentice, work smarter not harder, buy the effin easer wheel, unless ya want your fingers to burn and hurt from rubbing and the heat gun
its 20 bucks, so buy the wheel

Who said i'm gonna scrape it with my finger? that was the other guys idea

i did mine on a hot day....easily peeled off.....im good at peeling pinstripes off

lol...so i did work smarter....i didnt spend money on an eraser wheel

I'm saying in his case....he doesnt need one. WHEN i start doing body work i will buy one....but for now....just a waste of my precious money.

billytheman1188 · 02-05-2012, 02:48 AM

Quote:

Originally Posted by Papa Rad17

like i was saying, heat and elbow grease arent working on this like the rest. Iv spent t total of like 2 hours working on them. im about to start sanding the

things

sand it out with some 2000 grit....then bring it to a body or detail shop (pref detail place cause they do that stuff....body shops are usually pretty busy) have them buff the spots you sanded....boom...done.