11-16-2008, 10:16 AM
|
#1
|
GX Member
Join Date: Nov 2008
Location: Canada - New Brunswick
Posts: 41
|
Bang for your Buck
Alright guys... I have your basic Alero Coupe completely STOCK... about 108*** KM's on it... So she still has some Balls... Its standard and im the second owner (First owner was a woman who now has a family...) Its 2003, 2.2 Eco (Ill put some pictures up when i can find my dame Camera Cord)
The question is... what can I do to my car (As a single mod) to get the biggest bang for my buck...
Spark Plugs and cables?
http://www.andysautosport.com/oldsmo...k_plugs/apexi/
Intake?
http://www.doctorspeed.com/alero/alero-intakes.html
ECU?
http://www.yourhotcar.com/prod/Surge...ce_Chip/17558/
I see thoughs being the cheapest performance mods possible... Please let me know what you think would be the biggest bang for my buck... Or if you know something that would be better
|
|
|
11-16-2008, 11:50 AM
|
#2
|
Gone
Join Date: Mar 2004
Location: Lockport Ny
Posts: 19,244
|
avoid drspeed. get one from ebay instead. same thing SO much cheaper.
We don't have ECU's we have a PCM. (or VCM for ion's sake) i wouldn't invest in that until you have more performance mods done.
plugs and cables don't do much, unless your current ones are shot.
out of what you posted, intake is best.
followed by exhaust and some header upgrade. there are TONS of 2.2 guys on here, so search and you'll find a plethora of upgrades available.
also check ion's signature, the aleromod.com upgrades page.... get some ideas there
|
|
|
11-16-2008, 02:53 PM
|
#3
|
Boost Guru
Join Date: Mar 2004
Location: Buffalo, NY
Posts: 1,837
|
ECU, PCM, VCM...they all refer to the same thing, people just call them different things. There is no chip that will plug in to our ECU's to make more power. The only way is to buy HPTuners for $500-$650 and hit the dyno to tune for the best power.
Like Cherry said, spark plugs won't do anything for power unless what you have now are shot.... and there's no plug wires on Eco's.
An intake won't give you an amazing power increase, but you'll notice some better throttle response and it'll sound cool.
A header and full exhaust with a high flow cat would be the best way to free up some power without opening up the engine for some cams or anything like that.
__________________
|
|
|
11-16-2008, 02:55 PM
|
#4
|
636 whp
Join Date: Aug 2006
Location: AZ
Posts: 11,904
|
Spilner's right.
And ha, 67,000 miles... mine's got 190,000 and boosted.
|
|
|
11-16-2008, 03:53 PM
|
#5
|
GX Member
Join Date: Nov 2008
Location: Canada - New Brunswick
Posts: 41
|
Another question... The intake... ive seen people take out the filter box and just slap an intake cone on there... willl that work the same way or do i actually need the chrome tube/pipe thing for the real results
|
|
|
11-16-2008, 04:01 PM
|
#6
|
GLS member
Join Date: Apr 2008
Location: Roma, TX
Posts: 1,543
|
The thing is, the tubing relocates the filter to somewhere where there is colder air. Colder air= more power. If you just take out the box and replace it with a filter, you will be getting warmer engine compartment air, which wont provide you with as much power. Also the aftermarket tubing is smooth compared to the oem tubing which may cause some turbulence in the air it brings in, thus you will lose some flow.
__________________
http://www.cardomain.com/id/nothingbutolds
Cleared corners-RF P1 Subs- RF 201S Amp- Memphis Audio 4x6's and 6x9's-JVC Arsenal KD-APD89 Head Unit-front and rear z-spec strut tower brace- KYB GR2 struts- Intrax Springs- Magnaflow Muffler
|
|
|
11-16-2008, 05:02 PM
|
#7
|
GX Member
Join Date: Nov 2008
Location: Canada - New Brunswick
Posts: 41
|
Is there anyways I could use a Cold Air intake for a V6 alero? or would it not fit... and if so.. do you guys know any cars that has a similar design so i could search (For example) Cavalier Cold Air Intake...?
|
|
|
11-16-2008, 05:20 PM
|
#8
|
GLS member
Join Date: Apr 2008
Location: Roma, TX
Posts: 1,543
|
I don't know if you can use one from a V6 Alero. I don't really see why you'd want to do that though. The cavalier CAI, I have heard does work on aleros.
__________________
http://www.cardomain.com/id/nothingbutolds
Cleared corners-RF P1 Subs- RF 201S Amp- Memphis Audio 4x6's and 6x9's-JVC Arsenal KD-APD89 Head Unit-front and rear z-spec strut tower brace- KYB GR2 struts- Intrax Springs- Magnaflow Muffler
|
|
|
11-16-2008, 05:22 PM
|
#9
|
Gone
Join Date: Mar 2004
Location: Lockport Ny
Posts: 19,244
|
its more of an engine thing, rather then a body type thing. Cav 2.2 = alero 2.2
the v6 one won't work. its not the right angles.
|
|
|
11-16-2008, 05:23 PM
|
#10
|
GL Member
Join Date: Oct 2006
Location: Oshawa
Posts: 323
|
Quote:
Originally Posted by Guitar_B
Is there anyways I could use a Cold Air intake for a V6 alero? or would it not fit... and if so.. do you guys know any cars that has a similar design so i could search (For example) Cavalier Cold Air Intake...?
|
Ecotec WAI + 3.4 CAI?
... I know people have done this with the 2.4L. I think it should work similar based on the pipe routing for the ecotec.
maybe someone else can confirm this.
Last edited by Alero_1986 : 11-16-2008 at 05:29 PM.
|
|
|
11-16-2008, 06:56 PM
|
#11
|
636 whp
Join Date: Aug 2006
Location: AZ
Posts: 11,904
|
of course that works
i have all the info for the 2.4L at least on Aleromod Upgrades, all items are similar to the Eco
|
|
|
11-16-2008, 09:49 PM
|
#12
|
GLS member
Join Date: Jun 2004
Location: arizona
Posts: 2,380
|
the ecotec does not have spark plug wires, ignition module, and coil packs, and a boot, no wires
on mine i have a 62mm throttle body, rk sport warm air intake, rk sport header into factory cat, after cat 2.5 pipe into magnaflow muffler,
i had nothing but problem when i had a high flow cat, burnt 02 sensor after another, put factory cat back on replaced 02 sensors no problems since, car sounds great, decent amount of power, cant complain
you want allot of info on the ecotec check out j-body.org
|
|
|
11-16-2008, 10:22 PM
|
#13
|
636 whp
Join Date: Aug 2006
Location: AZ
Posts: 11,904
|
Quote:
Originally Posted by Guitar_B
|
LOL $19 per sparkplug what the eff?
Pick up some NGK TR55s and call it a day. It'll cost you like $8 total.
|
|
|
11-16-2008, 11:04 PM
|
#14
|
2Screwy
Join Date: Dec 2003
Location: South Dakota
Posts: 13,238
|
nitrous.....
|
|
|
11-16-2008, 11:05 PM
|
#15
|
GL Member
Join Date: Dec 2007
Location: Honolulu, HAWAII!
Posts: 683
|
if you get an ebay (chromeintakes) WAI (they just call it an intake) and a CAI for the V6 you can connect em for the ecotec. or just get an aem. i think the cavalier CAI will fit, but you better check w/someone who's done it, i dunno.
my intake doesn't really add too much for the sound, what's it supposed to sound like?
i thought this thread was about something else.
__________________
sigs are annoying
|
|
|
11-17-2008, 12:24 AM
|
#16
|
Canada's Ghost
Join Date: Sep 2008
Location: Alberta
Posts: 1,831
|
I know cosmo racing has a wai specifically for the 2.2L Alero the price I saw was about $96 US, if you can trust them is another question, I've never dealt with them so I have no clue. but once I find out if they are reliable I will likely get one for my car.
__________________
|
|
|
11-17-2008, 12:52 AM
|
#17
|
GL Member
Join Date: Oct 2006
Location: Oshawa
Posts: 323
|
Quote:
Originally Posted by AbHeLlRaZoR
I know cosmo racing has a wai specifically for the 2.2L Alero the price I saw was about $96 US, if you can trust them is another question, I've never dealt with them so I have no clue. but once I find out if they are reliable I will likely get one for my car.
|
I ordered the 2.4L WAI, and the short shifter with the weighted shift knob from cosmo.
They shipped quick, and the products are as advertised. There are at least a couple others users who have had pleasant experiences with them as well.
|
|
|
11-17-2008, 04:26 AM
|
#18
|
Hot and Fluffy.
Join Date: Aug 2007
Location: Alberta, Canada
Posts: 1,699
|
Quote:
Originally Posted by [ion] C2
LOL $19 per sparkplug what the eff?
Pick up some NGK TR55s and call it a day. It'll cost you like $8 total.
|
35 if you try to get Ion to ship em to canada. Hahaha
|
|
|
11-17-2008, 04:29 PM
|
#19
|
A-mod Pirate
Join Date: Jul 2008
Location: Big Bad Cali
Posts: 3,016
|
cosmo intakes are fine i got mine for like 108 shipped, and u can get a v6 cold air and hitch it up to where the 2.2 ends right behind the battery, its where the throttle body for the v6 is so instead of puttin a cone filter just continue piping, i havent done it yet but i plan to very soon
|
|
|
11-17-2008, 04:35 PM
|
#20
|
Canada's Ghost
Join Date: Sep 2008
Location: Alberta
Posts: 1,831
|
Quote:
Originally Posted by Alero_1986
I ordered the 2.4L WAI, and the short shifter with the weighted shift knob from cosmo.
They shipped quick, and the products are as advertised. There are at least a couple others users who have had pleasant experiences with them as well.
|
good to hear that, well I know what's next for my car.
__________________
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 10:35 AM.
|