Quote:
what size pipes, couplings, and filter should i buy to build a custom cai for an ecotec
|
whoops, must have missed this (march 2
)
You could mix and match what you like (of course it needs to all work together though). Here's the part list for the ID CAI:
1 K&N Conical Filter charger (with a 2.5” hose clamp)
1 ½” OD Hose for crankcase
1 90 Degree Nitrile Elbow with a colour adapter
1 Straight 3” Silicone Coupling
1 3” to 2.5” Silicone Reducing Coupling
5 3” hose clamp
3 2.5” hose clamp
1 3” OD Piece of tubing (J-shaped with a rubber grommet and 2
fittings)
1 3” OD Piece of tubing (90-degree)
1 2.5” OD Piece of tubing (S-shaped)
1 45” degree rubber coupling adapter
2 Mini clamps (one is included on the hose)
1 Thin hose for connecting the fuel pressure regulator to the intake