08-23-2009, 06:21 PM
|
#1
|
|
GX Member
Join Date: May 2006
Location: Round Lake/Antioch, IL
Posts: 164
|
How to: Clean the MAF Sensor
Not much to this but to do it...
What you need:
T27 Torx Bit
Ratchet
Ratchet Extension
Sensor Safe MAF Cleaning Spray
Q-tips
Spray EVERYTHING down with the cleaning spray. Then VERY VERY CAREFULLY take the qtips and after spraying them with the cleaning spray clean the metal inside the plastic piece. On this particular sensor it took 1.5 qtips to clean the sensor completely.
Now that everything is all clean again.. put it back together DUH.. lol
Be sure to get the sensor facing the right way..
Enjoy the better MPG and Performance!!!
And for those who care yes you must keep the screen in your MAF sensor in order to straighten the airflow out over the sensor thus giving a more accurate reading of airflow vs. that of a sensor without a screen. Also there is NO need for upgrading the size of MAF unless you are maxing out the stock one and since you can run 10lbs of boost on the stock maf and not max it I dont wanna hear anyone say that they are maxing their stocker without boost.. lol
__________________
You want more power? You Need MP Racing!
"Now drink with me deeply of the bourbon, scotch, and rye until such time as we are fighting drunk. Then we shall find, and beat the a**es of, the nonbelievers who ruined my feast" -Alvis
|
|
|
|
08-23-2009, 11:54 PM
|
#2
|
|
Gone
Join Date: Mar 2004
Location: Lockport Ny
Posts: 19,244
|
thanks for the write up.
please learn to use macro zoom.
|
|
|
|
|
08-23-2009, 11:55 PM
|
#3
|
|
636 whp
Join Date: Aug 2006
Location: AZ
Posts: 11,906
|
They look to be taken with a camera phone, so... no macro.
|
|
|
|
|
08-24-2009, 08:54 AM
|
#4
|
|
GX Member
Join Date: May 2006
Location: Round Lake/Antioch, IL
Posts: 164
|
not a camera phone but an old digi cam.. polaroid a520
no macro feature but thanks for bitchin.. lol
__________________
You want more power? You Need MP Racing!
"Now drink with me deeply of the bourbon, scotch, and rye until such time as we are fighting drunk. Then we shall find, and beat the a**es of, the nonbelievers who ruined my feast" -Alvis
|
|
|
|
|
08-24-2009, 12:30 PM
|
#5
|
|
GL Member
Join Date: Apr 2009
Location: Minnesota
Posts: 235
|
Nice guide! Would this really improve anything though?
__________________
2K 3.4L 4DR GLS
|
|
|
|
|
08-24-2009, 12:54 PM
|
#6
|
|
GX Member
Join Date: May 2006
Location: Round Lake/Antioch, IL
Posts: 164
|
Quote:
Originally Posted by Atmosphere
Nice guide! Would this really improve anything though?
|
if your sensor is dirty at all then it will improve your MPG and performance
__________________
You want more power? You Need MP Racing!
"Now drink with me deeply of the bourbon, scotch, and rye until such time as we are fighting drunk. Then we shall find, and beat the a**es of, the nonbelievers who ruined my feast" -Alvis
|
|
|
|
|
11-21-2009, 03:50 PM
|
#7
|
|
GX Member
Join Date: May 2006
Location: Round Lake/Antioch, IL
Posts: 164
|
bump...
__________________
You want more power? You Need MP Racing!
"Now drink with me deeply of the bourbon, scotch, and rye until such time as we are fighting drunk. Then we shall find, and beat the a**es of, the nonbelievers who ruined my feast" -Alvis
|
|
|
|
|
11-21-2009, 07:26 PM
|
#8
|
|
V.I.P. Member
Join Date: Jul 2004
Location: Kalamazoo, MI
Posts: 477
|
Well, I know they sell MAF cleaner... but...
What I've been taught by experienced techs is that using MAF cleaner will remove the protective coating on the sensor.
Once you clean it once, you will need to clean it much more often.
So keep that in mind.
(though yes, I know the price of a new MAF sensor)
|
|
|
|
|
11-21-2009, 08:31 PM
|
#9
|
|
Now a Ford Traitor.
Join Date: Mar 2008
Location: Greenland
Posts: 6,996
|
so, could i just use water and qtips? i mean, i dont NEED MAF cleaner, i just want to clean it lol
__________________
|
|
|
|
|
11-22-2009, 03:03 AM
|
#10
|
|
GL Member
Join Date: Sep 2006
Location: Canada
Posts: 874
|
|
|
|
|
|
11-22-2009, 11:47 AM
|
#11
|
|
GX Member
Join Date: May 2006
Location: Round Lake/Antioch, IL
Posts: 164
|
Quote:
Originally Posted by comanche
Well, I know they sell MAF cleaner... but...
What I've been taught by experienced techs is that using MAF cleaner will remove the protective coating on the sensor.
Once you clean it once, you will need to clean it much more often.
So keep that in mind.
(though yes, I know the price of a new MAF sensor)
|
well apparently they either werent using CRC cleaner or they never read the can.... it clearly states that it cleans and protects the sensor. I also highly doubt that a product made specifically to clean the sensor would also damage it.
__________________
You want more power? You Need MP Racing!
"Now drink with me deeply of the bourbon, scotch, and rye until such time as we are fighting drunk. Then we shall find, and beat the a**es of, the nonbelievers who ruined my feast" -Alvis
|
|
|
|
|
11-22-2009, 01:00 PM
|
#12
|
|
Aleromod part owner
Join Date: Nov 2003
Location: Far Northeast Philadelphia, PA
Posts: 18,199
|
Good write up.,
~Sticky-ed
__________________
33% ALEROMOD OWNER!!
2000 Olds Alero 3400 SFI 14.53 @ 94.93
1985 Olds Delta 88 307 SBO 17.96 @ 76.99
2007 Volvo V50 T5 6M 15.782 @ 89.12
www.facebook.com/kb0177
|
|
|
|
|
11-25-2009, 06:49 PM
|
#13
|
|
Female.
Join Date: Apr 2008
Location: Fort Hood, TX
Posts: 1,809
|
i just did this, along with cleaning the TB. holy moley, i don't think either have been done in the 132,000 miles she has on her. both were absolutely DISGUSTING. and now she idles a LOT better. i definitely suggest doing this along with cleaning the TB... it really improves performance, especially if it's never been done.
__________________
2012 Hyundai Veloster - new 40 MPG DD!! 
1990 Nissan 300ZX Twin Turbo 5 speed - "Zeus"
2005 Nissan Titan SE King Cab 4x4 - gas guzzler
|
|
|
|
|
11-25-2009, 10:00 PM
|
#14
|
|
Now a Ford Traitor.
Join Date: Mar 2008
Location: Greenland
Posts: 6,996
|
I Did mine, i'm seeing an improvement of about 10mpg
__________________
|
|
|
|
|
11-25-2009, 10:35 PM
|
#15
|
|
Female.
Join Date: Apr 2008
Location: Fort Hood, TX
Posts: 1,809
|
i've only driven 1.5 miles since doing mine, so i can't vouch for any MPG improvement quite yet! haha
__________________
2012 Hyundai Veloster - new 40 MPG DD!!
1990 Nissan 300ZX Twin Turbo 5 speed - "Zeus"
2005 Nissan Titan SE King Cab 4x4 - gas guzzler
|
|
|
|
|
11-26-2009, 02:35 AM
|
#16
|
|
GL Member
Join Date: Sep 2006
Location: Canada
Posts: 874
|
When I cleaned mine, i just removed the air cleaner and sprayed the MAF cleaner into the intake with the engine running. It did run smopother afterwards!
|
|
|
|
|
11-26-2009, 08:49 AM
|
#17
|
|
GX Member
Join Date: May 2006
Location: Round Lake/Antioch, IL
Posts: 164
|
Quote:
Originally Posted by Kilroy
When I cleaned mine, i just removed the air cleaner and sprayed the MAF cleaner into the intake with the engine running. It did run smopother afterwards!
|
...bad idea
you're lucky that nothing happend to your motor or the sensor itself
__________________
You want more power? You Need MP Racing!
"Now drink with me deeply of the bourbon, scotch, and rye until such time as we are fighting drunk. Then we shall find, and beat the a**es of, the nonbelievers who ruined my feast" -Alvis
|
|
|
|
|
11-28-2009, 07:49 PM
|
#18
|
|
GL Member
Join Date: Sep 2006
Location: Canada
Posts: 874
|
Quote:
Originally Posted by lvemy3100
...bad idea
you're lucky that nothing happend to your motor or the sensor itself
|
What could it do tot he motor OR the MAF?? I am sure that was the instructions on the can itself. |
|
|
|
|
11-28-2009, 10:31 PM
|
#19
|
|
GLS member
Join Date: Aug 2006
Location: Grand Forks, ND for school; Langdon, ND home
Posts: 2,632
|
^it won't hurt it, it just might not get it as clean as this posted method.
__________________
2001½ F150 XLT Crew Cab- true dual glasspacks with x-pipe, AEM intake, SCT X3 with VMP custom tunes, full stereo system, HID 55w heads and 35w fogs, 35% tint front and 20% rear, Lightning tail lights
04 F6 Sno Pro Team edition- MBRP race can, ODS clutch kit
01 YZ125- bored out to 144, PnP cylinder and head, Pro Circuit WORKS suspension, many other mods
|
|
|
|
|
11-29-2009, 08:16 AM
|
#20
|
|
GX Member
Join Date: May 2006
Location: Round Lake/Antioch, IL
Posts: 164
|
Quote:
Originally Posted by jayson_waltz
^it won't hurt it, it just might not get it as clean as this posted method.
|
actually as I stated previously it CAN hurt it which is why its a bad idea
you are spraying chemicals in your intake while the engine is running and the sensor is powered up... this is the reason why you are supposed to let the sensor dry before reassembling it.
__________________
You want more power? You Need MP Racing!
"Now drink with me deeply of the bourbon, scotch, and rye until such time as we are fighting drunk. Then we shall find, and beat the a**es of, the nonbelievers who ruined my feast" -Alvis
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 05:08 PM.
|
![[ion] C2 has a reputation beyond repute](images/reputation/reputation_highpos.gif)
