SO i have looked and looked.

[Nate's Alero]

?? 0_o ??

[Gr1m]

so you replaced your axle and it fixed the problem, i dont understand why there are still more questions? lol

[whiteliquid]

It didnt fix the problem...hence why i said the CV joint didnt fix the problem so now im changing out the front motor-tranny mount because thats what the GM mech recomended....

I was also wondering about bushings and where to get them...

[Gr1m]

sorry i misread what you wrote. you should be able to pick them up at any parts store or if you want to buy them online summit most likely has them.

[Fi-Alero]

I'm kind of having the same problem lol

Mine is shaking at 70+ in the steering wheel. It isn't bad, though. I just replaced my tie rod ends and it still is doing it.

I hope you figure this out so I can start looking at what i need to do.

[bryan213]

could be rack and pinion bushings. or loose hub

[whiteliquid]

Rack and pinion bushings are good...so are the hubs.

I hope that its this front mount. IT looked pretty bad when i took it off the car.

For anyone that wants to know you can not replace the front mount with an aftermarket one. They are cheaper but you will also have to replace the bracket. The oem ones are a little bit oval shapped and have bumps that help hold it in place. The aftermarket ones are perfect circles and have tabs.

[Blktrax]

Wow all this discussion and no one checked the lower ball joints.

Jack the front end up get the front tires off the ground (preferably on a lift). Turn off the trac control and run the car in 2nd gear, if you feel a vibration with the suspension unloaded, you got driveline/brake issues. If you dont, then its suspension related.

[whiteliquid]

Ball joints are good.

I think I'm going to replace the Rotors/calipers/pads today.
Prob going with cross drill slotted this time on the rotors.

Also would the drums have anything to do with this problem maybe????