Aleromod.com Aleromod.com

Go Back   Aleromod.com > General Help > Paint and Body Work

Reply
 
Thread Tools Search this Thread Display Modes
Old 01-27-2016, 07:24 PM   #1
nicothehut
GX Member
 
nicothehut's Avatar
 
Join Date: Aug 2011
Location: Vancouver BC
Posts: 203
nicothehut is on a distinguished road
Rear Small triangle window on a 4D....

hey guys someone busted out my small triangle window on the rear of my 4D.
I went to the scrap yard and they have 2.
What i need to know is does anyone know how to get it out
i pulled off the door panels in the scrap yard but could not see how to get at that small back window out.

ANY HELP would be appreciated before i go back to the scrap yard guys.
__________________
Bessie Braddock: “Sir, you are drunk.”
Churchill: “Madam, you are ugly. In the morning, I shall be sober.”
nicothehut is offline   Reply With Quote
Old 01-27-2016, 09:14 PM   #2
1970cs
GX Member
 
1970cs's Avatar
 
Join Date: Dec 2015
Location: Grand Ledge, MI
Posts: 177
1970cs is on a distinguished road
I believe those are glued in with black urethane! You may want to see how bad off that new glass is installed by a glass repair facility.

Pat
1970cs is offline   Reply With Quote
Old 01-27-2016, 09:57 PM   #3
nicothehut
GX Member
 
nicothehut's Avatar
 
Join Date: Aug 2011
Location: Vancouver BC
Posts: 203
nicothehut is on a distinguished road
thanks for the reply pat.

do you think i could cut the window out of the moulding and take it to a shop to install ?
__________________
Bessie Braddock: “Sir, you are drunk.”
Churchill: “Madam, you are ugly. In the morning, I shall be sober.”
nicothehut is offline   Reply With Quote
Old 01-27-2016, 11:03 PM   #4
sleepyalero
GLS member
 
sleepyalero's Avatar
 
Join Date: Aug 2010
Location: indy
Posts: 8,411
sleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond reputesleepyalero has a reputation beyond repute
Possible. But i heard those little windows are a PITA.
__________________
[SIGPIC]
[SIGPIC]
S. . .L. . . E . . .E. . .P. . .Y. . .IS A TRAITOR--HE GOT BORED SO HE SOLD ME AFTER HAVING AN AFFAIR WITH A RICE ROCKET
Oldsnut is my Hero!
Meet Destiny, shes a 2001 Oldsmobile Alero GLS, F40 6MT swap. (#2 of 3)
2/24/14 - 200,000 miles body/motor. 22,300 on F40.
Quote:
Originally Posted by Oldsnut View Post
He would Plasti Dip his pecker if he could.
Quote:
Originally Posted by tipnitty View Post
A girl touched my Pee Pee. So you can say things are getting pretty serious for me.
sleepyalero is offline   Reply With Quote
Old 01-27-2016, 11:12 PM   #5
dschroed
GX Member
 
dschroed's Avatar
 
Join Date: Jan 2016
Location: Salem, OR.
Posts: 30
dschroed is on a distinguished road
I'm getting ready to go to the junkyard tomorrow to pull a windshield. I would just go at it with a razor blade and the windshield removal tool. I would think it would pop right out. Im going to pick up the windshield removal tool for like 15 bucks at harbor freight.

You could also look up some videos on Youtube on how to remove windshields. That will give you an idea of how to get through the urethane.

People install their own windshields all the time. I know I'm going to. I imagine those tiny corner windows are much easier than working a windshield perfectly into place.

If you do do it yourself, pictures and a how-to would be appreciated by everyone here.
dschroed is offline   Reply With Quote
Old 01-28-2016, 12:12 AM   #6
Bahlzeron
GX Member
 
Bahlzeron's Avatar
 
Join Date: Jan 2016
Location: Grand Rapids, Michigan
Posts: 97
Bahlzeron is on a distinguished road
Use a removal kit, or also another method me and a buddy used a few times.... go slow and carefully as windows do break/crack rather easily (they are tough as hell, yet rather brittle). You'll need a sharp knife, and about two/two and half feet of small cable (bicycle brake cable, hood release cable, etc.) to act as a saw. Using the knife, make a small cut in the urethane, then feed the cable through it (you may need to push the cable through with the knife), using the cable as a saw, cut around the perimeter of the window. Works best with two people. I've done it this way before, just go slow.. if you get in a hurry it's easy to mess up and break the window.
__________________
2001 Black GX Coupe 2.4l 5 spd, short shifter, trunk lid w/ spoiler (amazingly from same original dealership), hood struts, Cosmo Evolution SRI, front & rear stb's, GAGT mirrors, more to come
1998 Bravada
I love beer, lots of beers.. I have found dark beers to be my favored.. however Labatt Blue is my go-to.
Bahlzeron is offline   Reply With Quote
Old 01-28-2016, 12:22 AM   #7
nicothehut
GX Member
 
nicothehut's Avatar
 
Join Date: Aug 2011
Location: Vancouver BC
Posts: 203
nicothehut is on a distinguished road
Thanks everyone...guess i am spending Saturday morning in the junk yard.
__________________
Bessie Braddock: “Sir, you are drunk.”
Churchill: “Madam, you are ugly. In the morning, I shall be sober.”
nicothehut is offline   Reply With Quote
Old 01-28-2016, 02:43 AM   #8
Bahlzeron
GX Member
 
Bahlzeron's Avatar
 
Join Date: Jan 2016
Location: Grand Rapids, Michigan
Posts: 97
Bahlzeron is on a distinguished road
Quote:
Originally Posted by nicothehut View Post
...guess i am spending Saturday morning in the junk yard.

Me too... this weekend is supposed to be above freezing and I need an unbroken plastic headlight mount piece, why did GM use such brittle fricken plastic for that..
__________________
2001 Black GX Coupe 2.4l 5 spd, short shifter, trunk lid w/ spoiler (amazingly from same original dealership), hood struts, Cosmo Evolution SRI, front & rear stb's, GAGT mirrors, more to come
1998 Bravada
I love beer, lots of beers.. I have found dark beers to be my favored.. however Labatt Blue is my go-to.
Bahlzeron is offline   Reply With Quote
Old 02-03-2016, 09:24 PM   #9
nicothehut
GX Member
 
nicothehut's Avatar
 
Join Date: Aug 2011
Location: Vancouver BC
Posts: 203
nicothehut is on a distinguished road
update...
The small triangle window is NOT glued in.
Its held in by 1 screw thats connected to long piece of moulding about half way down the door. This piece of moulding goes up and then all the way around the window.
To remove
Roll down rear window. remove screw and start moving glass and moulding side to side until in come out.
__________________
Bessie Braddock: “Sir, you are drunk.”
Churchill: “Madam, you are ugly. In the morning, I shall be sober.”
nicothehut is offline   Reply With Quote
Old 02-03-2016, 10:24 PM   #10
dschroed
GX Member
 
dschroed's Avatar
 
Join Date: Jan 2016
Location: Salem, OR.
Posts: 30
dschroed is on a distinguished road
great thing to know. thanks for the update
dschroed is offline   Reply With Quote
Old 02-04-2016, 02:40 PM   #11
falloutboy
GL Member
 
falloutboy's Avatar
 
Join Date: Aug 2005
Location: Grafenberg, Germany
Posts: 826
falloutboy is on a distinguished road
took pics while you installed it again?
__________________
My round trip through the US of A
Thanks
Julian
1979 350SB Chevrolet Camaro Project Thread
1995 Chrysler Stratus LX
1999 3.4L Oldsmobile Alero (resource page)
2002 Nissan Primera with CVT
falloutboy is offline   Reply With Quote
Old 02-05-2016, 07:41 PM   #12
nicothehut
GX Member
 
nicothehut's Avatar
 
Join Date: Aug 2011
Location: Vancouver BC
Posts: 203
nicothehut is on a distinguished road
No busy week at work no time. So i dropped on my coffee break with the window i pulled in the scrap yard to a glass installer down the street from my work. Cost me $47.
__________________
Bessie Braddock: “Sir, you are drunk.”
Churchill: “Madam, you are ugly. In the morning, I shall be sober.”
nicothehut is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:20 AM.


Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.