04-23-2013, 09:09 PM
|
#1
|
GL Member
Join Date: Jan 2012
Location: United States
Posts: 510
|
aftermarket seat mount
Sorry if this is measy im a little intox. Can somrone please explain the process of making brackets for "sport seats" im seriously consideribg getting aftermRket seats that go with my color scheme. Blue/silver either way it has ti have blue on it (fav color). Thanks in advancr
__________________
2003 V6 gl coupe. Mods: cold air intake, Resonator Delete, GAGT muffler, GAGT torqued 5 spoke rims, grand am pre02mirrors ,cross drilled and slotted rotors by powerstop, 1999 hvac blue knobs
|
|
|
04-23-2013, 09:19 PM
|
#2
|
GL Member
Join Date: Dec 2012
Location: Illinois
Posts: 276
|
I've never done this before, but I would use the factory tracks(might have to do some hacking and welding) and fabricate mountss for the new seats to accept the tracks. Really though, why don't you just get new covers made to match your theme?
|
|
|
04-23-2013, 09:22 PM
|
#3
|
GLS member
Join Date: Aug 2010
Location: indy
Posts: 8,411
|
Mfuller can chime in on this.
And be safe drunk ass
__________________
S. . .L. . . E . . .E. . .P. . .Y. . .IS A TRAITOR--HE GOT BORED SO HE SOLD ME AFTER HAVING AN AFFAIR WITH A RICE ROCKET
Oldsnut is my Hero!
Meet Destiny, shes a 2001 Oldsmobile Alero GLS, F40 6MT swap. (#2 of 3)
2/24/14 - 200,000 miles body/motor. 22,300 on F40.
Quote:
Originally Posted by Oldsnut
He would Plasti Dip his pecker if he could.
|
Quote:
Originally Posted by tipnitty
A girl touched my Pee Pee. So you can say things are getting pretty serious for me.
|
|
|
|
04-23-2013, 10:41 PM
|
#4
|
GLS member
Join Date: Oct 2010
Location: MA
Posts: 1,369
|
Quote:
Originally Posted by 03gxeco
Sorry if this is measy im a little intox. Can somrone please explain the process of making brackets for "sport seats" im seriously consideribg getting aftermRket seats that go with my color scheme. Blue/silver either way it has ti have blue on it (fav color). Thanks in advancr
|
__________________
just call me "Doc"
HID 55W 8000K lowbeam headlights~~Sony Deck~~2 12 in alpine type r subs/ alpine amp
Tinted tail lights~~CAI~~Pacesetter Headers~~ Magnaflow High Flow Cat~~Catback Exhaust System
Check out my alero!
Aleromod Showcase Video
|
|
|
04-24-2013, 09:18 AM
|
#5
|
GL Member
Join Date: Jan 2012
Location: United States
Posts: 510
|
Quote:
Originally Posted by sleepyalero
Mfuller can chime in on this.
And be safe drunk ass
|
Fortunatly for me i was not drunk, i hate hangovers. Id say more tipsy. Haha glad i gave you guys a chuckle. Seat covers are nice but to find a set that fit properly and look good enough would be a tragic failure
I will be stopping in my buddys upholstry shop soon to see if he can do something with my factory seats
__________________
2003 V6 gl coupe. Mods: cold air intake, Resonator Delete, GAGT muffler, GAGT torqued 5 spoke rims, grand am pre02mirrors ,cross drilled and slotted rotors by powerstop, 1999 hvac blue knobs
|
|
|
04-24-2013, 09:20 AM
|
#6
|
GLS member
Join Date: Feb 2011
Location: Kansas
Posts: 2,116
|
i think that is more what they were talking about getting custom fabric used to upholster the seats
|
|
|
04-24-2013, 10:24 AM
|
#7
|
|
When I mounted my Recaro seats, I used the factory sliders since I wanted to use the factory mounting locations in the floorboard - if the floor was flat, it would've been easier to justify drilling new holes in the floor for aftermarket seat brackets that bolt to the side of the seat (of course then I'd be looking at a racing shell and not a reclining street seat - that would have saved a bunch more weight though).
Anyway, I used some aluminum bar stock to mount the seats to the factory sliders. Since the holes on the bottom of the seat do not line up with holes on the sliders, this was a simple way to adapt things. Basically, the aluminum bar stock bolted onto the seat bottoms. I then took careful measurements to determine the proper location for bolting the bar stock to the sliders. I had to drill new holes in the sliders, and used high-strength fasteners to bolt the bar stock to the sliders. The bar stock raised the seats a negligible 1/4" above the sliders. I did loose the factory power adjustment on the driver's seat, but no big deal. It worked fairly well for a cheap solution.
|
|
|
04-24-2013, 05:46 PM
|
#8
|
GL Member
Join Date: Jan 2012
Location: United States
Posts: 510
|
Quote:
Originally Posted by mfuller
When I mounted my Recaro seats, I used the factory sliders since I wanted to use the factory mounting locations in the floorboard - if the floor was flat, it would've been easier to justify drilling new holes in the floor for aftermarket seat brackets that bolt to the side of the seat (of course then I'd be looking at a racing shell and not a reclining street seat - that would have saved a bunch more weight though).
Anyway, I used some aluminum bar stock to mount the seats to the factory sliders. Since the holes on the bottom of the seat do not line up with holes on the sliders, this was a simple way to adapt things. Basically, the aluminum bar stock bolted onto the seat bottoms. I then took careful measurements to determine the proper location for bolting the bar stock to the sliders. I had to drill new holes in the sliders, and used high-strength fasteners to bolt the bar stock to the sliders. The bar stock raised the seats a negligible 1/4" above the sliders. I did loose the factory power adjustment on the driver's seat, but no big deal. It worked fairly well for a cheap solution.
|
I will have to see if i can follow your footsteps on that
__________________
2003 V6 gl coupe. Mods: cold air intake, Resonator Delete, GAGT muffler, GAGT torqued 5 spoke rims, grand am pre02mirrors ,cross drilled and slotted rotors by powerstop, 1999 hvac blue knobs
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 03:24 PM.
|