Hey guys what's up? I have a 2003 Alero and my keyfob stopped working so I ordered a matching numbers remote off ebay. I have done a little research on programming methods but everything I have tried has been proven ineffective.. Is this a dealer only issue like only the dealer can do the programming?
1
Enter your vehicle with your key and remote and shut the door behind you.
2
Press and hold the unlock tab on your driver's side door and be prepared to hold the tab through the following step.
3
Insert and remove the key from the ignition twice in a row and then insert the key in the ignition and leave it there.
4
Release the unlock tab on your driver's side door and wait for the vehicle to emit three beeping sounds.
5
Hold the unlock and lock buttons on your remote until the vehicle beeps again and release the buttons. Your remote will now be successfully programmed.
6
Repeat step five with any additional remotes and remove the key from the ignition to end the programming sequence.
1
Enter your vehicle with your key and remote and shut the door behind you.
2
Press and hold the unlock tab on your driver's side door and be prepared to hold the tab through the following step.
3
Insert and remove the key from the ignition twice in a row and then insert the key in the ignition and leave it there.
4
Release the unlock tab on your driver's side door and wait for the vehicle to emit three beeping sounds.
5
Hold the unlock and lock buttons on your remote until the vehicle beeps again and release the buttons. Your remote will now be successfully programmed.
6
Repeat step five with any additional remotes and remove the key from the ignition to end the programming sequence.
Quote:
Originally Posted by nicothehut
Has anyone PERSONALLY done this and made a fob work ?
Tried for 30 mins yesterday and nothing.
I think this is the sequence for just the 99 model years. The rest of the 2000+ Have to go to the dealer.
Churchill: “Madam, you are ugly. In the morning, I shall be sober.”
Linear Mode
