transmission

turboalero · 02-12-2012, 11:21 AM

is the 4e40 and 4t45 run off the same computor

[ion] C2 · 02-12-2012, 11:23 AM

it's the 4T40E and 4T45E... it's all in the PCM dude, accessed through HPTuners

Redog · 02-12-2012, 10:58 PM

the 40 and 45 are both the same tranny. IIRC

turboalero · 02-22-2012, 10:12 PM

will it work on a straight swap. my trans is slipping need stronger trany

a.graham52 · 02-22-2012, 11:14 PM

doesnt the 45 have slightly different enternals?

Redog · 02-22-2012, 11:17 PM

Quote:

Originally Posted by turboalero

will it work on a straight swap. my trans is slipping need stronger trany

Another 4t40 tranny

If your doing all this work, get the HPTuners. Changing the FDR with HP takes all of 2 seconds

JLw7123 · 02-22-2012, 11:24 PM

If you are going to replace the tranny why not just swap in a 5 speed.

kwhauck · 02-23-2012, 10:51 AM

Quote:

Originally Posted by JLw7123

If you are going to replace the tranny why not just swap in a 5 speed.

because there is more work involved......

sleepyalero · 02-23-2012, 12:30 PM

Quote:

Originally Posted by kwhauck

because there is more work involved......

to me it sounds like he doesnt do any of his own work. he comes here, posts a thread whenever there is a problem and he probably doesnt even use the search button

but if he turbo'd his alero himself, i figured he would know alot of the questions hes already asked. not trying to be a d*** but...

turboalero · 02-23-2012, 06:57 PM

I do, do my own work. ld9 is a new block to me I have built Honda and integras before and I just built a srt4 in by boys backyard that made 560 on the dyno. But this ld9 is a bit@h. I want 400hp but this trans is holding me back. Last dyno pull did 258hp shock block on 11.7 psi with mad trans slip. Should get at least 300 with a good trans.