Is there any interest on this forum for a built 3400/3500 hybrid
with an RSM SC Kit.
The engine is a new build
The RSM Kit was used for 2 years
Engine:
Bored 0.030
Block, Oil Pan , Lower Intake, waterpump housing , Valve Covers all coated with Eastwood Ceramic Coatings
ARP Studded block by
Christopher Alan, on Flickr
TCE double Roller
TCE double roller 2 by
Christopher Alan, on Flickr
MMS Stage 2 SC cam
ARP rod cap bolts
New Hyper .030 pistons
Total Seal Gapless rings
New Oil pump
Parts by
Christopher Alan, on Flickr
Upgraded LS lifter springs
Lifter spring upgarde by
Christopher Alan, on Flickr
TOP END 3500
MMS Stage 2 heads
Cometic MLS Viton Head Gaskets
ARP Head studs
MMS Stage 2 heads by
Christopher Alan, on Flickr
Polished Stage 2 MMS by
Christopher Alan, on Flickr
TCE Billet 65mm TB
TCE TB by
Christopher Alan, on Flickr
Upgraded Felpro metal upper and Lower intake manifold gaskets
36lb Fuel Injectors, harness modified
EGR delete TIG smoothed not just blocked off
EGR delete by
Christopher Alan, on Flickr
RSM Billet Crank Pulley(also have the Alt Pulley
Crank pulley by
Christopher Alan, on Flickr
Header Flanges and mandrel tubes in kit form for headers(S&S) as well as a set
of stainless headers(OBX) I was going to adapt to a W body.....all new
Plus a ton of extras...ie...injectors,valve covers,coil packs, injector rail.........
Engine 4 by
Christopher Alan, on Flickr
Engine 2 by
Christopher Alan, on Flickr
Engine 3 by
Christopher Alan, on Flickr
RSM Kit
P1010001 by
Christopher Alan, on Flickr
This picture has an ECU, 2 FMU's, and MSD System that IS NOT INCLUDED as they are long gone.
THis is all off the top of my head and I am certain that I have left out something but you get the idea.
I can go into detail with anyone who might be interested in all or part.
Thank you
Chris
Threaded Mode