Saturday I was at the junkyard grabbing a set of hood struts and hinge assembly (the hood I got a couple months back from same junkyard is a replacement with both the strut studs and hole for prop rod) I decided to look around for the alum. control arms I managed to find a pair, so Sunday me and a buddy went back and half an hour later had em off. At ~$25 each + $4.50 core each I couldn't turn that deal down. Earlier tonight I ordered new ball joints, and poly bushings. The junkyard doesn't differentiate between steel and aluminum control arms so I can bring back my old steel ones for the core charge.
The OE ball joints are riveted on so I gotta grind the heads off the rivets and punch em out (no big deal, pretty easy), I'll probably use a Dremel to do the grinding (I think I have an angle grinder in the storage unit, gonna have to see if it even works). Thursday is my B-day, so I took Friday off.. got nothin to do but drink and grind rivets!...lol.
I'll grind the heads off on the ball joint steel plate side so I don't mess up the aluminum arms, even though the other side would be the easier side to get to.
Prothane 7-234 bushings
MOOG 6701 ball joint sold each need two (ouch expensive!)
Any way I know, I know, you want pics!
The ridge in the second pic, is that a retainer for the original bushing that needs to come out, or is it part of the arm? It looks like part of the arm to me.