What you will need:
Ratchet wrench with 6 inch extension
Spark plug socket. Make sure it isn't very large around (diameter). It's a tight fit.....
13mm socket
8mm socket
needle nose pliers
4 spark plugs
Pop the hood obviously.....
Not shown: Disconnect the negative (black) battery cable using 8mm socket.
Disconnect this electric plug on the driver's side of the cam cover. (don't know what it is. any help?)
Using 13mm socket, remove the 4 cam cover bolts.
Remove cam cover. It won't come easily, but will take some force.
Use needle nose pliers to remove spark plug boots.
Clip the boots back on to this thing. (what the hell is that anyway? coil pack?)
Use spark plug socket and 6 inch extension to remove plugs. I had to use a 3 inch. It made a 20 second removal take 5 minutes on each plug.
Out with the bad. (70k miles)
In with the new. (.050 gap)
Reverse the steps above to reinstall everything.
Any questions?
Threaded Mode