Springs

BlackJack · 04-09-2006, 01:24 AM

going for some QA1's for the back. Anybody got a stock unsprung height on springs? Looking to get about 450 spring rate at stock height.

yeah, I know, trip to the dentist coming up, soon as I hit the first bump.

Basically I know alot of ya have put on aftermarket springs and might have a set of stockers to measure for me if you dont mind. Also, I.D. at the perches too please.

BlackJack · 04-09-2006, 10:37 PM

really, they're that long, eh?

hmm....out of 25 views on this thread you'd think somebody would have said something. Nobody out there has a set of stock springs to measure (uninstalled) ?

alerored04 · 04-09-2006, 10:59 PM

i can check for ya tomorrow, are all four the same, if not how do i recognize the rears so i know i get the right numbers for ya?

BlackJack · 04-09-2006, 11:02 PM

ok, I'm not going to tap-dance and look like a fool

Anybody want to help out with volunteering how to tell the difference on front / rear? Or are the both the same?

2fst4u · 04-09-2006, 11:02 PM

rears are skinnier. fronts are fat.

BlackJack · 04-09-2006, 11:03 PM

thanks

BlackJack · 04-09-2006, 11:08 PM

well, there ya have it, alerored04. If you would be so kind as to measure them when you have a chance, I'd definitely be grateful.

Appreciate it, both of yas.

alerored04 · 04-10-2006, 12:04 AM

sure thing man ill take care of it for ya.

alerored04 · 04-10-2006, 04:07 PM

Just measured it Blackack, rear springs unsprung, (the skinny one) is 15 1/8" tall.

Fast Eddie · 04-10-2006, 05:01 PM

DIAAM you must have a dentist in the family with the rating. I think we figured about 350/300 F/R for a really stiff setup at one point. 450 lb is gonna be like a solid post. On the up side you wont have any of that rear end squat

BlackJack · 04-10-2006, 09:30 PM

thanks alerored, I appreciate that. I know it's alot to ask, but can you also measure the coil diameter at the perch ends, so I can make sure the ones I buy are not to big or small in diameter...

FastEddie, yeah, that's the idea. No squat in back. Basically I've already got the fabrication in progress, but I'll have a reasonable (250 lb) spring rate in the front, and I'm using aircraft cables with pins that I'll insert once I get to the track that will hold the front end down (stop downward travel since we have no snubbers)and keep weight over the front end, and also prevents the CV's from getting out of their normal 90* angle from the tranny. This will prevent torque loss from geometrical changes at the axles, and also from the front end raising and back end squatting.

alerored04 · 04-10-2006, 09:40 PM

no prob man, ill check it right now.

alerored04 · 04-10-2006, 09:45 PM

just measured it, the perch end (the narrow end, i believe) is 3 5/8" the other end for comparison is 5" even. So you know i measured from the outside of the stock that the spring is made from, so the very outside of the metal to the same spot on the other side.

BlackJack · 04-10-2006, 09:52 PM

thanks man, you saved me a whole lot of headache with that. I appreciate you taking the time out to help me.

alerored04 · 04-10-2006, 10:53 PM

no problem man, glad i could help out, i figure its a 30 ft walk from my bedroom to the garage and the tape measure is in a drawer on the way, i might as well help out where i can. Im just curious but why are you looking at going stock ride height? more travel? ground clearance? or just easier to get? I was just wondering for curiosities sake.

BlackJack · 04-10-2006, 10:57 PM

dropping the front end, keeping the back end stock height. This will force more of the overall weight over the front tires and help with traction. The stiffness of the springs I'm going to use just keeps the back from squatting on launch and causing me to lose traction even more.

Rubered00 · 04-11-2006, 10:24 AM

Quote:

Originally posted by BlackJack@Apr 10 2006, 07:57 PM
dropping the front end, keeping the back end stock height. This will force more of the overall weight over the front tires and help with traction. The stiffness of the springs I'm going to use just keeps the back from squatting on launch and causing me to lose traction even more.

Quoted post

Wont this cause you to understeer much easier in any corners that you try to go fast around? I realize that your mainly doing all of this for the drag strip but im j/w

alerored04 · 04-11-2006, 02:33 AM

ahh ic, that makes sense, thanks for explaining it to me.

BlackJack · 04-11-2006, 09:14 PM

I dont drive fast around corners. That's for kiddies that are trying to impress people on the streets with "cheater" burnouts. I level off and hit the gas.