12-08-2012, 07:11 PM
|
#1
|
V.I.P. Member
Join Date: May 2005
Location: Denver, CO
Posts: 325
|
Pulling?????
dropped crossmember to replace rack and pinion, new power steering lines, control arms, sway bar bushings and links, front struts,caliper brackets bolts, and hubs all around.
and... cant say it was fun at all...
well now i get a pull to left during acceleration and pull to the right when i let go of the gas..
it dosen't do it while coasting
example with cruse control on holding speed if it slows to much and tries to add speed it pulls left once it stops trying to match speed it pulls right
had brakes plus do rotation and balance of tires and alignment
any ideas???
other thing is one knock i can feel in pedal and shift knob for acceleration
and one knock once i apply the brakes
every now and then i get a knock in a tight turn...
all bolts are to torqued to spec. i double checked today all except the sway bar bushing bolts dont feel like needing to drop the crossmember again
__________________
2002 4door alero 2.2 ecotech Two tone Pearl White upper, Graphite Lower.
|
|
|
12-08-2012, 07:16 PM
|
#2
|
GLS member
Join Date: Aug 2010
Location: indy
Posts: 8,411
|
either something isnt together right, or you need another alignment
__________________
S. . .L. . . E . . .E. . .P. . .Y. . .IS A TRAITOR--HE GOT BORED SO HE SOLD ME AFTER HAVING AN AFFAIR WITH A RICE ROCKET
Oldsnut is my Hero!
Meet Destiny, shes a 2001 Oldsmobile Alero GLS, F40 6MT swap. (#2 of 3)
2/24/14 - 200,000 miles body/motor. 22,300 on F40.
Quote:
Originally Posted by Oldsnut
He would Plasti Dip his pecker if he could.
|
Quote:
Originally Posted by tipnitty
A girl touched my Pee Pee. So you can say things are getting pretty serious for me.
|
|
|
|
12-09-2012, 09:21 AM
|
#3
|
Premier V.I.P. Member
Join Date: Feb 2009
Location: Oxbow SK
Posts: 1,385
|
my car did the EXACT samee thing for weeks. lower control arm bolts were missing the nuts!
__________________
2002 Alero w/ 2.2 ecotec 5 speed
power window conversion, heated leather seats, 16" rims, high & low hids, auto dimming rear mirror, speedbuilt front and rear sway bars, poly bushings all around.
2005 Silverado 2500HD w/ 6.0l Vortec 4L80E
Tuned 6.0l, exhaust, intake, with 450000km on the odometer. Tow Rig
1985 Pontiac Trans Am GTA w/ 5.7 Vortec 700r4
mild vortec 350 with 4 speed auto. performance suspension. factory gold color. project car
|
|
|
12-09-2012, 01:29 PM
|
#4
|
Premier V.I.P. Member
Join Date: Dec 2009
Location: New Hampshire
Posts: 1,979
|
Start looking EVERYTHING over
__________________
The dumbass that shows up randomly 10 years after selling the car.
|
|
|
12-09-2012, 04:02 PM
|
#5
|
Its Beer Thirty
Join Date: Nov 2005
Location: Goodyear, AZ
Posts: 1,259
|
Bad ball joint or torn control arm bushing can cause this.
__________________
Quote:
Originally Posted by Daytona
And, yeah, I try to keep my expectations & standards really low. That's the only way to guarantee that I'll always exceed them.
|
|
|
|
12-09-2012, 04:34 PM
|
#6
|
Premier V.I.P. Member
Join Date: Dec 2009
Location: New Hampshire
Posts: 1,979
|
Loose rack can cause s e noise too. You would think they would have noticed something like this doing the alignment. I can't imagine it was easy to line it up with something with enough play to cause a pull. Did it pull before or after the alignment?
__________________
The dumbass that shows up randomly 10 years after selling the car.
|
|
|
12-10-2012, 10:09 PM
|
#7
|
V.I.P. Member
Join Date: May 2005
Location: Denver, CO
Posts: 325
|
it was pulling before i replaced everything
and since i had it apart thats why i decided to replace everything i could get to
the alignment was done after. it started doing it again.
already replaced both sway bar links because one split.
every bolt i could get to has been checked its not as bad as when it first started but its still quite noticeable and very annoying when accelerating down the hwy.
from what i can tell i have a bad rear trans mount
i may have someone else change those out since i will want all of them changed and i dont feel like doing it myself this time.. well thats untill i see the quote... i may have to if its gonna run way to much $$$
__________________
2002 4door alero 2.2 ecotech Two tone Pearl White upper, Graphite Lower.
|
|
|
12-19-2012, 08:55 PM
|
#8
|
V.I.P. Member
Join Date: May 2005
Location: Denver, CO
Posts: 325
|
alll said and done loose control arm bushings
so anyone else having this happen
leave car at curb weight(on the ground)
loosen both control arm bushing bolts
then retighten to Torque specs
Front(horizontal) : 60 N·m (45 lb ft) plus 180° rotation
Rear(Vertical) : 100 N·m (74 lb ft) plus 180° rotation
__________________
2002 4door alero 2.2 ecotech Two tone Pearl White upper, Graphite Lower.
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 02:13 AM.
|