Moisture After Clearing Corners

[ryanthefizz]

so i cleared my corners several weeks ago and now that spring has arrived i have noticed a small amount of moisture building over the blinker area. It is just a small film that covers about the bottom 1/4 of the blinker area so im not going to rip the silicon apart. just wandering if heating it might get rid of enough of it to make it unnoticable?

[cutelilcntrygrl]

try taking the headlight out and take the rubber covers off and hold a hair dryer in there on low for a couple of minutes. then put some more silicon on it just incase theres a leak or something.

[99BLKALERO]

^^^^ what she said.....

[smlzalero]

Yeah, but make sure you let the air inside the light cool off (let it air out) before you put it back together again.

[alerocar01]

i had the same problem. first i tried hair drying it out and then i tried putting in the oven and then finally i had to take it a part and reseal it.

[eag182]

you can stick it in the refridgerator or use a dryer either way should get the moisture out. same principle with clearing moisture from your windshield you can use the ac or heat...

[ryanthefizz]

ty