PDA

View Full Version : New Motor


aleroguy83
04-09-2005, 08:17 PM
well my motor has been giving me problems ever since it overheated and i changed the gasket on lower intake manifold so i have decided to buy a new engine to replace mine with. so what i have decided is that when i get the new motor checked out and put in my car i am going to tear my old engine apart and rebuild it for a turbo(maybe two?). but i just wanted to thank everyone for all their support and help and i will try and post some pics off this install while it is in progress but i'm not sure. if anyone has any advice it will be greatly accepted.

freakout
04-09-2005, 11:08 PM
I would take lots of pics of wire routing, connections and at different stages of disassembley. Did this on a caddy with an northstar v8 . It makes the jigsaw puzzle easier to put back together. Couldn't believe how many times I used them.

aleroguy83
04-10-2005, 02:00 PM
yeah i remember when i changed my lower intake gasket, remembering how the wires ran was hard.

bigd6983
04-13-2005, 02:04 AM
yea all the normal stuff.......take pictures....lil labled plastic baggies for all the bolts.....and u should be good

aleroguy83
04-13-2005, 03:55 PM
all of a sudden now i have another motor coming from phoenix that i won on ebay for $50 and i have a guy wanting to sell me a 94 camaro with the 3.4 v6 in it and he only wants 500 for the whole car. it's slightly wrecked but it still drives. so if everything goes as planned i will have two cars, both with 3.4s and an extra 3.4 to play with. How does this happen?

jamcllw
04-13-2005, 04:14 PM
The 3.4 in the Camaro is different than the one in the N-Bodys.

Scratch that I thought you were going to use the Camaro engine in your car.

aleroguy83
04-14-2005, 11:48 PM
well it turns oout that the camaro is way to wrecked but i may go ahead and buy the drivetrain frm it so when i switch my alero to rear wheel drive i will have some of what it takes

RAVAGE214
04-18-2005, 07:48 PM
Originally posted by aleroguy83@Apr 14 2005, 10:48 PM
well it turns oout that the camaro is way to wrecked but i may go ahead and buy the drivetrain frm it so when i switch my alero to rear wheel drive i will have some of what it takes
Quoted post



wow...

99ALERO
04-18-2005, 11:53 PM
Originally posted by aleroguy83@Apr 14 2005, 10:48 PM
well it turns oout that the camaro is way to wrecked but i may go ahead and buy the drivetrain frm it so when i switch my alero to rear wheel drive i will have some of what it takes
Quoted post



good luck finding room for everything. It would be cool if it would work

aleroguy83
04-20-2005, 12:44 PM
well it is going to be a while before that happens so dont look for it anytime soon. right now i am just concentrating on getting the new motor in and old motor out and getting old motor rebuilt for the turbo. does anyone know if it would be possible to put twins on an alero. me and a guy at work were talking about it and have been wondering ever since?