PDA

View Full Version : Warning Warning Warning


midnightalero01
02-16-2005, 07:39 PM
so today when i was driving home from a uofm college visit 3 warning lights came on... the service vehicle soon, the anti lock brakes and the trac off light... i tried my trac button but that didn't change anything and i checked the abs fuse and it's alright... does any one know what the problem could be... i recently installed a new stereo and ran the ignition wire to the wiper fuse but that was 2 or 3 days ago and no problems til now so i don't think that has anything to do with it... any help would be great thaks guys

flalero
02-16-2005, 07:51 PM
Sounds like you have a f'ed up wheel speed sensor. You will have to replace the entire hub assembly to remedy the problem, or you could just check the connections to make sure they are clean and tight.

midnightalero01
02-16-2005, 07:53 PM
where are the connections to be checked at?

flalero
02-16-2005, 07:59 PM
You, know, I'm not 100% sure, I've never checked mine out. I know there is electrical connection on the inside of the hub on each rear hub, I'm not sure if that is the wheel speed sensor or not, though.

johny_boy32
02-16-2005, 07:59 PM
do you have an intake?

wrightie
02-16-2005, 08:02 PM
Sounds like the ABS sensor I had the same problem and that was the problem with mine.

midnightalero01
02-16-2005, 08:02 PM
nope no mods except my stereo for now

midnightalero01
02-16-2005, 08:03 PM
Originally posted by wrightie@Feb 16 2005, 08:02 PM
Sounds like the ABS sensor I had the same problem and that was the problem with mine.


so what'd you do about yours

flalero
02-16-2005, 08:05 PM
Woops, I forgot about that too, oh well. I was also wondering what an intake would have to do with trac light, etc?

FormulaNERD
02-16-2005, 08:38 PM
search button helps. this has been covered many times.

stealthlero
02-18-2005, 12:32 AM
hey this happened to me one night, since you were installin a stereo you would've had to take out the stereo and shifter bezels, which means you would've had to put your car in lets say 1st gear to get the shifter off, and so you probly engaged the e-brake....... and when i was doin this one day, after i got all done there turned out to be a screw under my e-brake so it couldn't go down all the way..... check it out, for as stupid as it sounds it happens! hope i helped ;) ;)

ImSoBored
02-18-2005, 10:59 AM
mine did that(3 warninglights)
but they all went away once I turned the car off, then on again.