Electrical

[Mr_White]

I did a search for this but did not find any thing.Im installing lighted gas & brake
pedals. They came with a o/f switch but i want too hook them up so when the dash lights come so do the pedals. so my question is were is a good sorce for 12v.that i tap into for this. :wacko:

[Vtolds]

Cubby hole light.

[Silentalero]

/\ yea what he said


remember though black is always ground on AC

[Vtolds]

If you have a simple 12v tester make sure that you are hooking the right wires to the right wires, like silent said it should be the BLACK wire as ground.

[Redog]

The orange wire behind the radio is good too

[Mr_White]

so do i need to pull center console out

[Vtolds]

Yes just stick your hand in the cubby whole make a fist and try to pull your hand back out with the console attached to it.

[-Alero-]

or if yo uwanna save yourself alot of wire splicing and trouble of takign things apart, run the wire to the passenger side door, and plug the positive end with the interior lamp fuse, and whenever the interior lamps turn on when ever its night or whatever the lights yo uwant will come on. B)

[mike2002]

Originally posted by Silentalero@Dec 14 2004, 06:52 PM
/\ yea what he said


remember though black is always ground on AC
unless your wiring a house, then its green! or bare copper of course :P

[turtles_ride]

i have the lighted pedals, and i've got them hooked up to the same switch i have my fogs hooked up to. When you have them turned on you can't really see them because the steering wheel is in the way. I'd recommend not having them turn on all the time with the interiors because, like i said, you can't always see them even when they're on. save yourself the time and hook them up to a different power source, or run a piggy back fuse (your close enough to the fusebox) with a switch if you want.

[Mr_White]

any pics

[Vtolds]

do the 12v ni the cubby hole it wl give you the less trouble.