View Full Version : Spark Plug Question
Redog
12-01-2004, 11:17 PM
I have the Bosch Platuum +4 in the car right now and I still have that cut out problem, I also have a few misfires.
Are the plugs the cause of this? If so what should I replace with :unsure:
NGK v- power or iridium
AC Delco rapid fire.
I did the search on this board, and they were the plugs I got. Plus it's been 30,000 plus miles since I swaped them
-Alero-
12-02-2004, 12:46 AM
yeah i talked to you earlier about this. i could of sworn i was the one who told you the +4's will give you nothing but trouble. NGK and AC delco will fix your problems i bet. B)
Redog
12-02-2004, 06:23 PM
Yeah when I get the heads done I'm getting new plugs ;)
jeremythebear
12-02-2004, 06:54 PM
The Bosch plugs will eventually cause the puter to throw a code due to the frequency of misfires. Go to a GM dealer and for free they should hook you up to their hand unit and you can see the frequency. Delco will correct this - others I have not used.
K Dan
12-03-2004, 06:08 PM
Where can u get AC Delco plugs from? non of the stores around here have them and the dealer wanted 9 bux a piece!!!!!! are they really that expensive?
jeremythebear
12-03-2004, 06:26 PM
yes
mfuller
12-03-2004, 09:28 PM
Got my AC Delco Rapidfire #14's from www.rockauto.com for less than $4 a piece.
Redog
12-03-2004, 10:07 PM
Yo Mfuller how and were have you been??!!
Is #14 the size?
mfuller
12-03-2004, 10:49 PM
I've been swamped at work - it's nice and keeps me out of trouble.
Anyway, the part number for the plug is 14. Be sure to check the gap before you install them.
vBulletin v3.6.0, Copyright ©2000-2025, Jelsoft Enterprises Ltd.