Log in

View Full Version : Razzi Install

j_smith
10-28-2004, 11:15 PM
Hey guys, I am very interested in the Razzi kit, however I have a couple questions. I've read on here that it isn't a direct replacement for stock bumpers/side skirts, so what exactly is involved with the installation? Can any normal body shop install without any problems? Thanks for the input!
smokinAMD
10-28-2004, 11:26 PM
The side skirts go directly over the factory side skirts, as does the front bumper. The rear bumper however has to be trimmed a bit on the bottom for the razzi to go over it.

And yes, any normal body shop can do it.
isellalerodrop
10-29-2004, 01:20 AM
So the razzi kit goes over the stock bumpers, it doesnt replace them. Also how is the fitment on the aas kit does it need any mods or cutting to make it fit or does it just go right on.
smokinAMD
10-29-2004, 01:41 AM
The AAS kit is a direct replacement for everything. I've heard the side skirts need some modding though since they only made one set for 2 and 4 doors.
kwhauck
10-29-2004, 11:49 AM
Originally posted by smokinAMD@Oct 28 2004, 11:41 PM
The AAS kit is a direct replacement for everything. I've heard the side skirts need some modding though since they only made one set for 2 and 4 doors.
yes they do although it is really not that hard me and my buddy mounted up my kit...
Skiboarder311
10-29-2004, 06:22 PM
My 6 year old nephew could install a razzi kit.

Its very simple


AAS kit is fairly ez, just needs a lil trimming
Pimpalero03
10-29-2004, 10:37 PM
u dont need to trim back bumper for razzi. mine isnt
doubleN0alero
10-30-2004, 10:02 AM
What you need to install the razzi is:
1. a couple beers..
2. screw driver
3. drill..
4. a buddy
5. a couple more beers..
that shoudl answer your question...
I didn't trim my back bumper either...i couldn't bring myself to it...
smokinAMD
10-30-2004, 10:42 AM
Suppose I should check to see if mine is trimmed or not.
doubleN0alero
10-30-2004, 12:55 PM
if you don't cut it, you get a little gap...but its not bad at all..
Skiboarder311
10-31-2004, 08:37 AM
Originally posted by double0alero@Oct 30 2004, 09:02 AM
What you need to install the razzi is:
1. a couple beers..
2. screw driver
3. drill..
4. a buddy
5. a couple more beers..
that shoudl answer your question...
I didn't trim my back bumper either...i couldn't bring myself to it...
u forgot self tapping screws :thumbsup:
1WhiteOSV
11-03-2004, 12:32 AM
and one last beer......KEG