View Full Version : Front License Plate Bracket
KevinKII
06-25-2013, 10:07 AM
I recently moved back to Ohio, and need to have a front license plate. I bought my car in PA and it did not come with a front bracket since it was not needed.
I am looking for the bracket and any items I may need to connect it to the bumper. I have found some OEM brackets on ebay, but I am not sure if there is anything else needed to attach. The bumper does have the little indents where the screws will go into.
So my questions are:
Do I need anything besides the bracket and screws?
What type of screws do I need?
jackal2000
06-25-2013, 10:41 AM
If you have to ask what kind of screws then you may want to just take it to a local GM dealer and have them install it, most likely for free.
zzyzzx
06-25-2013, 01:01 PM
I bought mine at a Cadillac dealership that was next to the office I was working in at the time. They had it the next day and I think it was around $15-$20. I used some stainless steel wood screws (and washers?) to install it to the car) and some M6-1.0 (also with washers) bolts to connect the plate to the mount. I may have used my M6 tap on the plastic before putting in the bolts.
Redog
06-25-2013, 05:44 PM
The bracket came with pop rivets, but yeah I would just go to the dealership.
You can use screws, but the pop rivets hold better IMHO
billytheman1188
06-25-2013, 07:06 PM
DUDE....just line the plate up nice....get something sharp to make some marks in the bumper so you know where to screw.....line it up, poke a hole in the middle of the top holes on the plate, put plate on ground, go get a drill with a bit that is a little thinner than the screw...make two holes....put plate up to bumper, screw screws/bolts in. DONE. No need for the ugly bracket...
03glgold
06-25-2013, 10:31 PM
My bracket was screwed on, and I took it off...If I can find it and you really want it I will give it to you for shipping
kwhauck
06-26-2013, 02:29 AM
Just risk driving around without it, it looks better that way.....
zzyzzx
06-26-2013, 10:00 AM
The bracket came with pop rivets, but yeah I would just go to the dealership.
The one I got from the dealer did not have that. Ye, the ones from the junkyard had them, and I broke plenty of them trying to get one off.
KevinKII
06-27-2013, 01:21 PM
My bracket was screwed on, and I took it off...If I can find it and you really want it I will give it to you for shipping
Sounds good. Let me know if you find it. I'll send you PM as well.
Nas Escobar
06-27-2013, 05:05 PM
Just risk driving around without it, it looks better that way.....
This....
Isn't Ohio one of those states that require it but a good majority don't comply with it and keep it on the windshield?
Do that!
vBulletin v3.6.0, Copyright ©2000-2025, Jelsoft Enterprises Ltd.