One more lol

[DeeJayy]

Rev limiter? How do I take that off hahaha. I hate when people rev and it goes to redline but mine stop at just above 4000rpm. -_-

[a.graham52]

its there to keep you from looking foolish. and to show you who is in control lol.

[RalphP]

Rev limiter? How do I take that off hahaha. I hate when people rev and it goes to redline but mine stop at just above 4000rpm. -_-

If you only have $30 in your bank account, I HIGHLY recommend, DON'T.

But how to take it off? Get a tune on the ECU. Or buy the software and tune it yourself.

Both of which will cost more than that $30. And if you don't pay attention and overrev it, that'll cost a LOT more than $30.

The rev limiter is there to keep people from shrapnelling their motors by overrevving the motor.

RwP

[03glgold]

It can be done at the same time as the speed limiter, as has been said you have to be careful not to overrev it, I also wouldn't advise touching the upper limiter unless you build it first (eg. if you manual shift an ecotec and don't shift soon enough there is a limiter at 6500 rpm, going past that limiter won't take long to cause catastrophic failure.

[mfuller]

And why do you want to rev higher?
Just when you are stopped?
Wastes fuel and makes you look like a dork.

[sleepyalero]

I'd say leave it, in gear it will go till it needs to shift.

[Shiwnath]

You're not supposed to be revving your engine without a load anyways. Also who are you trying to impress? You'll just look stupid after your engine blows.

[Redog]

Tuned PCM here, rev limiter still there :rolleyes2:

If you remove it, please post a vid of your engine going BOOM! :lol:

[[ion] C2]

Yeah there's no reason to rev higher than 4000 in neutral.

[fisdad]

Now I want to see this "BOOM" video! Although, I do wish that my tranny had better gearing. It seems to take 20 seconds to downshift when I punch it. I've been resisting the urge to manually drop gears lately.

[billytheman1188]

It seems to take 20 seconds to downshift when I punch it. I've been resisting the urge to manually drop gears lately.

SMDH.....and you wonder why it takes 20 seconds to downshift.

[03glgold]

when is the last time the fluid was changed, it could be getting to where it is needed, not flushed just the pan drained, and the filter changed

[Redog]

Buy some of that Lucas stuff, I wrote a review on it on here.

Kept my tranny from slipping for about 2 years or so.

Of course, just like tranny fluid, it smells like sweaty feet wrapped with bad Doritos

[[ion] C2]

yeah the lucas trans fix is magic, i put some in 2 months ago.

[Redog]

Magic, not really, but a really good band-aid

[sleepyalero]

Never worked on mine, still slipped.

[jawa]

Rev limiter? How do I take that off hahaha. I hate when people rev and it goes to redline but mine stop at just above 4000rpm. -_-

dont

[guiguilandry]

Rev limiter? How do I take that off hahaha. I hate when people rev and it goes to redline but mine stop at just above 4000rpm. -_-

Put it in 1
Pull the handbrake
Do a burnout...

You'll be limited to 6500 rpm..:awesome:

[DeeJayy]

Is it true if your tranny fluid hasn't been changed for a LONG time, It's bad to change it?

[jawa]

google it

[RalphP]

Is it true if your tranny fluid hasn't been changed for a LONG time, It's bad to change it?

DeeJayy - Short answer, if it hasn't been changed in a while, be sure you can afford to get the tranny rebuilt/replaced even if you DON'T replace it.

Medium answer - Don't get it flushed, have them do a pan drop / refill.

Long answer - Google it, I don't feel like typing in the expanded version of "War and Peace" tonight :p

RwP

[zearchyo]

^^ what he said