remote starter in a '99 3.4

[vt100]

Hey guys!

I'm installing a remote starter/alarm into my 99 here in a few days.

I am curious if anyone has a schematic or wiring diagram for the dash and steering column. I don't have the factory service manual and don't want to spend a bunch of time with a multimeter. I'd appreciate any help or advice you could give me.

Thanks!

--Scott

[crazykid]

check out www.the12volt.com should find about everything you need there :)

[vt100]

Great!

I appreciate the help. That is definitely a much-needed website.

I've spent too much time trying to pin out everything in other cars, I wish I'd known about that one sooner!

--Scott

[crazykid]

yeah no problem.. its a great site :)

[GLSalero99]

Don't know if you got it installed or not, but the only wire I couldn't find on the writeups was the tach wire; its in the engine compartment behind the coil packs, its a little white wire in a harness. I spliced into that one and everything works fine. Oh, first time I hooked everything up, I had the wrong accessory wire and the a/c wouldn't come on. There are two in there the same color and only one is the correct accessory for a/c. I didn't solder anything until I tested all the connections. Good luck, if you're not done already...