Wheels

[fisdad]

Thanks to the search feature I know that our bolt pattern is 5x115, but I found a nice set of Pontiac GTO wheels and tires on Craigslist and the bolt pattern is 5x120. Will these fit or can I modify my car to fit them without spending a lot of money?

[Ttop191]

you could get them redrilled, but it wouldn't really be worth it...

[Redog]

Close only counts in horseshoes and hand greandes

Plus the fact that a GTO is a RWD car, I bet the offset is probably in the low 30's

[kwhauck]

Plus the fact that a GTO is a RWD car, I bet the offset is probably in the low 30's

which would be ok, IF it had the right bolt pattern....

[Cliff8928]

Close only counts in horseshoes and hand greandes

Plus the fact that a GTO is a RWD car, I bet the offset is probably in the low 30's

The offset on a GTO is 48mm..

Many RWD cars use high offset wheels nowadays... A 'vette has no wheels with an offset under 50 for quite a while now.

[Redog]

which would be ok, IF it had the right bolt pattern....

Really?!?!? Cause I was looking at American Racing Torq Thrust for the Alero when I bought the Racelines.

The offset on a GTO is 48mm..

Many RWD cars use high offset wheels nowadays... A 'vette has no wheels with an offset under 50 for quite a while now.

I didn't know that :eek:

[kwhauck]

Really?!?!? Cause I was looking at American Racing Torq Thrust for the Alero when I bought the Racelines.

Ken, where the HELL have you been....:lol: My rims are 17x8 with a +32 offset with 255/40/17s and fit perfect on the front!! The rears are in a little bit which is ok, because I don't won't them sticking out farther looking like a RWD car.....

The offset on a GTO is 48mm..

Many RWD cars use high offset wheels nowadays... A 'vette has no wheels with an offset under 50 for quite a while now.

Which means using something like this it would work.....

http://compare.ebay.com/like/390299640841?ltyp=AllFixedPriceItemTypes&var=sbar&rvr_id=221891041936&crlp=1_263602_304662&UA=%3F*I8&GUID=01a2a0e212f0a0a9eef2ea22fe52ea61&itemid=390299640841&ff4=263602_304662

Obviously factoring in both the wheel offset and the adaper. In reality you would need a 1" adapter and a mid to high 50 offset in order for it to work...

[Cliff8928]

Exactly, I have C5 mag wheels on my beretta with a spacer. 17x8.6 which weighs under 17 lbs. Not to mention the offset can be perfect because you can get any size spacer you want.

[fisdad]

Well if anyone knows of some common cars with factory wheels 17+ with the proper bolt pattern please let me know so that I can keep an eye out around craigslist and the junkyards. I really have no idea what I'm looking for other than I like 5 spoke wheels.

[wrestlingandrunning]

Gran Prix wheels

[kwhauck]

^ fugly......

[Cliff8928]

Bonneville GXP wheels would look nice...

There's a ton of different GM wheels out there that would work... Mine originally came off a CTS.

[kwhauck]

If I remember right acura tl type s wheels are damn near a perfect fit....but they are hard to get a hold of and sometimes cost as much as new rims.....

[03Sleepr]

If I remember right acura tl type s wheels are damn near a perfect fit....but they are hard to get a hold of and sometimes cost as much as new rims.....

those look really similar to your rims..I think I may try and get ahold of a set this summer, maybe..

[kwhauck]

I'll have to research but I thought when I was looking previously they come factory as 17x8 with a +32 offset, which is the same as mine, and perfect fitment for the front....

[surreal_awakening]

These Bonneville rims are 17" 5-spoke. This link is just for reference, but i have a set of 4 of these with Hankook Ventus HRII tires already on them. I ran them on my Alero for a little while. I seem to recall that I needed a small (1/8" I think) spacer on the rear. Note that this link is NOT my auction...mine are for sale in my garage cleaning thread.

http://cgi.ebay.com/ebaymotors/Bonneville-SSEi-17-Painted-5-Spoke-Bar-Rim-Wheel-N93-_W0QQcmdZViewItemQQhashZitem5196a310ceQQitemZ35041 9620046QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

[kwhauck]

Looked it up, the 17x8 acura tl type s rims are made by enkei and have a +45 offset, higher than I would like to see but would still work and look great with a 1/2in spacer.....

[fisdad]

Thanks for all of the replies! lots to think about