A/f gauge hookup

[gmalero2000]

can anyoen tell em where i need to hook up the A/f ratio gauge? and also thinking of putting and oil temp gauge how can i go about hooking these up? im not used to putting gauges on these cars as im used to carbed engines any help/ pictures would be GREAT :yahoo:

[heineck]

is it narrowband or wideband? does it come with an o2 sensor?

[gmalero2000]

its narrowband equus gauge

[clutch1]

probably just tap into the signal wire on one of the O2 sensors... purple wire if I remember right.

Oil temp.. I'd assume they make "T" adapters to turn the say.. oil pressure outlet into two holes.

[gmalero2000]

ok thank you guys where is the o2 sensor in the engine any major landmarks that i can notice?

[clutch1]

On the exhaust manifolds, usually one on each manifold very close to each head. And possibly one right before the cat on the downpipe.

[gmalero2000]

can i tap into just one? or do i need tot ap into all?

[heineck]

just the purple wire

[gmalero2000]

then i need to ground it

[heineck]

on my last afr it had a constant, switched, ground and signal. so yea.

[wrestlingandrunning]

Here's another way to hook up your nb a/f

http://www.pfyc.com/pc/PN3010/ALGAU/Air-Fuel+Gauge+Installation+Pigtail.html

[gmalero2000]

will that work on my alero?

[wrestlingandrunning]

Yes, grand am and alero are basically the same vehicle in a lot of ways.

[Redog]

kinda Under the coil pack ;)

[TheThickster]

narrowbands are wortless unless you like a light show at idle.

[Redog]

^^ True that.

I had a narrowband but I do not have a wide band right now.


I only ordered it 2 months ago and it's still backordered :cry:

[wrestlingandrunning]

^^ True that.

I had a narrowband but I do not have a wide band right now.


I only ordered it 2 months ago and it's still backordered :cry:

Who did you order your wideband from?