head tork

[zr900lre]

can someone tell me what pounds to tork the heads down

[zr900lre]

sorr its a 3400

[walkerj014]

(Haynes reference: Chapter2, pg 2C-1) Cylinder Head Bolts:

Step 1:
1997 33 FT-Lbs
1998-2001 37 FT-Lbs
2002 and later 44 FT-Lbs

Step 2:
1997 through 2000 - Rotate an additional 90 degrees (1/4 turn)
2001 and later - Rotate an additional 95 degrees

Hope thats what you want?

[01silveralero]

44 lb ft + 95 Degrees
Make sure you make a x shape when doing the bolts. Go bottom right to top left over to top right back to bottom left then you can do the ones in the middle the same way.

[zr900lre]

thanks for the help i torked it 44 ft pounds and its all done and running i thought i did it wrong but i didnt i forgot to plug the alternator in and i had to give it some gas for the first start it starts right up once again thank for the help