Cant find full exhause and headers to fit my 3400

[sfi3400]

I have been searching for about a week now and i cant find any full dual exhaust systems and long/short tube headers that would fit on to my 3400 series. I hope after if i or you guys on here can help me find them after i get these my intake and my x2 performance chip im at about 230+ hp you can reach me at my aim at pbmaster6289

[MixtapeMessiah]

intake, headers and exhaust arent gonna put u at 230+ hp buddy sorry but no dice....

If youre looking for stuff for ur 3400 though check out www.wot-tech.com, as far as a full dual exhaust goes ur gonna have to go custom

[sfi3400]

the x2 performance chip adds 30-50 hp and the intake im guessing from what apex said 15 but thats at red line ha

so that wot tech would have the headers. what would go better with y 3400 as sound and performance long or short

[Fenderxcore]

Pacesetter makes a dual exhaust catback system...Check them out

Oh and chips are fake

[MixtapeMessiah]

the x2 performance chip adds 30-50 hp and the intake im guessing from what apex said 15 but thats at red line ha

LOL not talkin shit here man but thats a load of bs..

Oh and based off the fact you have 2 total posts, welcome to the site...The search bar comes in handy, I suggest using it

[sfi3400]

Pacesetter makes a dual exhaust catback system...Check them out

Oh and chips are fake

i have heard the pacesetter b4 on my buddys alero and it was really QUITE sounded liek stock. Im trying to find the slp exhaust and s&s headers but i heard they may dont make them anymore

[Fenderxcore]

i have heard the pacesetter b4 on my buddys alero and it was really QUITE sounded liek stock. Im trying to find the slp exhaust and s&s headers but i heard they may dont make them anymore

I have it on my 4 banger an it's not QUIET* at all...I've set a few car alarms off here and there

[MixtapeMessiah]

www.wot-tech.com

and look in the 3400 thread on here

[sfi3400]

I have it on my 4 banger an it's not QUIET* at all...I've set a few car alarms off here and there

how much was you pacesetter exhaust

[Fenderxcore]

You'll find it for about $330 on average...I have a full exhaust system done tho so naturally it's louder

[AbHeLlRaZoR]

you can always get a custom bent set up from a exhaust shop.

[sfi3400]

You'll find it for about $330 on average...I have a full exhaust system done tho so naturally it's louder

im on pacesetters site now you have there heads to? because im looking for that deeper sound not like im opening a cracker jack box and pulling out a HONDA

[AbHeLlRaZoR]

he's got the L61 (2.2L) ecotec like myself.
You have a V6 with just a Cat back you'll get a deep sound that won't sound like a coffee can on a Honduh.
I think andysautosport.com carrys the S&S headers...

[Fenderxcore]

You won't get that sound with a 3400...I forget the name of the company that makes the headers for the 3400 but I've heard they're like $700...Pacesetter doesn't make any headers for your engine to my knowledge

[Gr1m]

with those mods on a 3400 you should get about 10hp at the wheels depending on what other mods you have, but i hope you realize your going to be spending atleast $1500 for the things you listed that you want.

headers - $1000
new down/flexpipe - $100-200
custom catback exhaust - $300-1000
tuned PCM - $200

[MixtapeMessiah]

www.wot-tech.com (http://www.wot-tech.com)

and look in the 3400 thread on here

bumping yet again. Do a search man come on

[sfi3400]

he's got the L61 (2.2L) ecotec like myself.
You have a V6 with just a Cat back you'll get a deep sound that won't sound like a coffee can on a Honduh.
I think andysautosport.com carrys the S&S headers...

ok now you are talking ha. i would like HOOKER heads but they $$$ and dont make to fit my car

[sfi3400]

with those mods on a 3400 you should get about 10hp at the wheels depending on what other mods you have, but i hope you realize your going to be spending atleast $1500 for the things you listed that you want.

headers - $1000
new down/flexpipe - $100-200
custom catback exhaust - $300-1000
tuned PCM - $200

my headers didnt cost that much, i bought hooker headers for my ta for about 300

[Fenderxcore]

my headers didnt cost that much, i bought hooker headers for my ta for about 300

Eh you'd be surprised

[AbHeLlRaZoR]

my headers didnt cost that much, i bought hooker headers for my ta for about 300

But thats for a commonly built engine. The LA1 3400 isn't built as much so there is less of a demand for headers hence the higher price.

[MixtapeMessiah]

well f bodies have a ton of aftermarket, as youll find with the alero there isnt a lot of companies that offer a ton of aftermarket. hense why a lot of things cost a lot more

[sfi3400]

yea i just found that out from that andysautosport.com i did find the s&s heads that fit my 3.4 on the pacesetter site there exhaust says just fits 2.2 and 2.4

[Fenderxcore]

UH HUH...I'm going to bed...

[AbHeLlRaZoR]

Good night Fender...

Parts are hard to come by, there are a few companies that do make parts out there but they aint cheap like Small Block Chevy parts... luckly I have the 2.2 and can use parts from other ecotec engines in the Delta platform and build a Hybrid monster lol

[sfi3400]

i have a feeling modding the engine in this is going to BURN a hole in my bank

[AbHeLlRaZoR]

it happens... the old saying is

"Fast, Reliable, & Cheap Pick 2"


EDIT: you just gotta priotize what you want to do with your car. do you want a quick car to rock out at the drag strip with, do you want a cruiser to pick up the ladies with, or do you want a bit of both worlds have some engine mods to stray away from the norm and have the looks?

[sfi3400]

cant i pick all 3

[sfi3400]

idk there is a custom exhaust shop i just found thats like 10 mins from me here in SNOWED IN OHIO ill go see what they all say and work from there..

[AbHeLlRaZoR]

you can't pick all 3 cause whatever 2 you pick they cancel out the third. Check the exhaust shop out it will be worth it search around the forums and I'm sure you'll find the right muffler I think the Flowmaster 40's are a popular choice for the 3400 I got my exhaust done at a local shop considering I have a 4 banger it doesn't sound like crap.

[sfi3400]

yea i heard 4 bangers aleros and SOME do sound amazing i usually have to double take to look and see if its a 4 or 6.

[kwhauck]

please search, all your nonsense is hurting my head......used s and s and TOG headers are the only thing that's available, and custom if you have fab skills, if andy's has some left over s and s I would hop on them before they are gone, also pacesetter does not make 3400 headers, it has been covered before.......and there is no TRUE dual exhaust for the alero, in order for that it would have to start with custom headers.....k thanx bye

[JLw7123]

the grand am exhaust will fit from borla. but the best way is to get flowmaster mufflers..

[Cliff8928]

also pacesetter does not make 3400 headers, it has been covered before.......

Well, they do but they're for the W-Body.. You may be able to fit them but nobody has tried.

[Redog]

OK I'm going to go out on a limb here and say you are the guy that contacted me on YouTube.

Those "chips" are total BS. If you really want to try it out, go to Radio Shack and pick up a 1/2 watt 330k resistor for 10 cents and put each end in the plug for the IAT sensor. Any HP gain is the placebo effect ;)

PaceSetter headers are not going to fit the 3400, they are for the 4 cyl engines.

Settle down a little bit. I know your excited, but just calm down. Pick a budget and go from there and do one thing at a time. It's not going to happen overnite. Any car guy will tell you that ;)

[Cliff8928]

[QUOTE=Redog;527581

PaceSetter headers are not going to fit the 3400, they are for the 4 cyl engines.[/QUOTE]

These will fit the 3400, but if they fit within the confines of the Alero is something that hasn't been tested.

http://static.summitracing.com/global/images/prod/large/psm-70-1207_w.jpg

[worknprog.99]

looks like s&s and if you find them you will payabout 700+for whats shown

[sfi3400]

Yea i found s&s heads for 515 or 715 if you add a cat. I ordered flow-master super 44's and tips. Should i add a catco cat or just keep my stock cat??

[WhiteV6]

headERS. Heads are cylinder heads, headers are exhaust components. If you can find any S&S in stock anywhere, it will be a miracle upon miracles. Everyone wants them. WOT-Tech will have N body headers in progress next month. No rumors, its a fact.

[sfi3400]

i have the site bookmarked for s&s headers but im still debating if i need that catco, some people say i should some people say don't waste the money.

[white04alero]

hey. sorry for threadjack, but if you wanted to use 3500 intake manifolds, will they bold directly up to the 3400? or do you need to use the ones from wot-tech?

[alerogls001]

Ben, what's the status on your headers? :)

[[ion] C2]

haha this is the first time I noticed this thread

sfi3400 is funny as fook

[WhiteV6]

Working on J bodies. Probably start getting the N body owners organized for the beta sets in a few weeks. I think we have people in Florida for this already.

[jayson_waltz]

C2;530176']haha this is the first time I noticed this thread

sfi3400 is funny as fook

agreed but hey, we are all noobs at one point in time lol

[sfi3400]

Geeee Thank You


but im getting two super 44's from summit 2.5 inlet o and outlet c. 2 borla tips and K&N CAI

[alerogls001]

Working on J bodies. Probably start getting the N body owners organized for the beta sets in a few weeks. I think we have people in Florida for this already.

Nice. Thanks man.