PDA

View Full Version : SOHC Quad...single cam performance!

DOHC_tuner
05-05-2009, 12:30 AM
Yeah right:lol:
maybe for good gas mileage.

Well I finally got my Quad together. Feels dam good. With some help from my best friend I got it done in no time:yahoo:

086 decked head installed with stainless steel valves & H.O. valve springs
H.O. Camshafts w/ pulley
and of coarse built internals with other goodies.
heineck
05-05-2009, 12:36 AM
hehe 40s, looks good though, how much did u drop on the powdercoating?
AbHeLlRaZoR
05-05-2009, 12:39 AM
hope it performs as good as it looks.
DOHC_tuner
05-05-2009, 12:43 AM
powder coating was $120...but thats from last when I first rebuilt the motor. I had a leaking valve after an issue and now I had to rebuild it again.

So I swapped cams and heads thus I had to powder coat the new cam carriers. Another $80 just for the cam carriers...price had increased since then due to the economy.

Oh and I have a 24, my boy has a 40;)
Vinalero
05-05-2009, 03:14 AM
Sweet engine. I hope you get it to work right this time so you can enjoy it!
CactusWill
05-05-2009, 03:43 AM
Looks nice. Brew helps too
Bad99Olds
05-05-2009, 04:42 AM
you two look scary. I would think twice before beauting you two up :) engine is looking incredible as aweosme, keep us updated for sure.
Th0r
05-05-2009, 08:10 AM
Your buddy has good taste in booze.

Engine looks nice, but I think it would look better in the car. :p
Ghadsphi
05-05-2009, 08:40 AM
Wow I haven't seen a latino holding a Mickey's since I lived n PA and we ran outta MD20/20 and everything else.
Bad99Olds
05-05-2009, 09:06 AM
haha oh mickeys....
CactusWill
05-05-2009, 09:55 AM
you two look scary. I would think twice before beauting you two up :)


because you'd wake up in an alley somewhere, which is probably nothing new :p
Bad99Olds
05-05-2009, 09:56 AM
because you'd wake up in an alley somewhere, which is probably nothing new :p

please. I back down from no fight. And as for waking up in strange places, eh. Read my write-up on my weekend and youll understand.
DOHC_tuner
05-05-2009, 01:01 PM
Sweet engine. I hope you get it to work right this time so you can enjoy it!

It worked perfect last time.....I was driving it for over 4 months. Then I got tired of seeing the PCV hose connected to a small breather filter.

I hooked it up after the t-body instead of before and thats when it all went wrong. I should have knew better.
Bad99Olds
05-05-2009, 01:20 PM
It worked perfect last time.....I was driving it for over 4 months. Then I got tired of seeing the PCV hose connected to a small breather filter.

I hooked it up after the t-body instead of before and thats when it all went wrong. I should have known better.

Haha. Looking good man. Plans for boost in the future I take it?
kluv27
05-05-2009, 01:52 PM
Yeah....my grandpa used to drink mickey's when he did work in the garage too.....by the way,that engine looks clean as all get out!keep up the good work and im trying to do my engine like that as well:coolio:
DOHC_tuner
05-05-2009, 02:06 PM
5 lbs. of boost with the high compression from the 086 would be PERFECT!
Bad99Olds
05-05-2009, 02:07 PM
5 lbs. of boost with the high compression from the 086 would be PERFECT!

agreed
Alerosaint
05-05-2009, 02:09 PM
looks real gewwd.....
01OldsAleroGt
05-05-2009, 03:52 PM
that is a sexy bitch of a motor.. and kickin back drinkin and wrenchin is the way to go man +1
Spilner521
05-07-2009, 03:38 AM
5 lbs. of boost with the high compression from the 086 would be PERFECT!
5 lbs of boost from what?

Screw that, run a 3076R and crank the boost controller. Yeah it's a high compression head, but with low compression pistons. Just spray a little meth if you need to :thumb:
spyhunter
05-08-2009, 08:20 PM
5 lbs of boost from what?

Screw that, run a 3076R and crank the boost controller. Yeah it's a high compression head, but with low compression pistons. Just spray a little meth if you need to :thumb:

booooooooooooooooooooo


c16 or nothing.
DOHC_tuner
05-08-2009, 11:41 PM
I removed them because of legal reasons. Im in a fight with an insurance company right now and I cant have them seeing that motor with me next to it;)
Spilner521
05-10-2009, 02:18 AM
booooooooooooooooooooo


c16 or nothing.
I would agree with you. Unfortunately the gas station up the street doesn't have a C16 label on any of their pumps, and I have a cat, so for me it's 93 unleaded.
[ion] C2
05-10-2009, 09:39 AM
I thought it was funny that although my cat is cut off, the car is a lot quieter than it was with the supercharger.
Spilner521
05-10-2009, 05:21 PM
Turbos make good mufflers.
DOHC_tuner
05-10-2009, 09:27 PM
Turbos make good mufflers.

http://memimage.cardomain.com/ride_images/3/3205/22/33010010614_large.jpg:lol:
[ion] C2
05-10-2009, 10:15 PM
That's... interesting...
guiguilandry
05-10-2009, 10:50 PM
http://memimage.cardomain.com/ride_images/3/3205/22/33010010614_large.jpg:lol:

remote mount FTW (if you're supecharged) that would be badass on my car... and I would keep the s/c too, need low end torque....
Spilner521
05-12-2009, 04:44 AM
and I would keep the s/c too, need low end torque....
Right because a fast spooling turbo can't give you any low end torque at all...
spyhunter
05-13-2009, 07:22 AM
remote mount FTW (if you're :wacko:supecharged:ohmy:) that would be badass on my car...:drink: and I would:Rage: keep:thumbsdown: the s/c too:nuts:, need low end torque:wtf2:....:emotlol:

ignorant quote of the day.:yahoo::dance1:

Lemme have some fun, as if I hadn't had fun already.

click this link below.. does that look like "lacking" low end torque?
http://farm1.static.flickr.com/145/429135557_cc151116a8_o.jpg
cliff's version of the link
Spy's dyno: minimum torque 214tq @ 2500rpm max 424tq @ approx. 4400rpm
Spilner521
05-15-2009, 02:22 PM
:haha: :emotlol: