P&P UIM and LIM help

[Bad99Olds]

alright the source of my coolant leak is evidently a damaged manifold which compromised the seal. my question, can anyone recommend a good place to find already ported and polished manifolds (both) and a larger throttle body for our cars? thanks

[AftermathAlero]

www.milzymotorsports.com (http://www.milzymotorsports.com) www.mpracing.org (http://www.mpracing.org)

[Bad99Olds]

so i take it no one sells the manifolds already ported and polished?

[mfuller]

Do you need an upper or a lower? What year is your vehicle? 99 I'm assuming, but it is always best to ask......

[Bad99Olds]

yes its a 99 and i want both, the key thing is buying them already P&P's.

[AftermathAlero]

those sites i've listed has port and polished intake manifolds. dunno about for the 99's but they got 2000+up. only difference is EGR stuff on the upper intake. Lower still the same.

[Bad99Olds]

those looked like you had to send them a set of manifolds... i was hoping to avoid that all together...

[Gr1m]

you dont have to mail them in, you could pay the extra core charge and they would mail out a p&p set to you

[Bad99Olds]

ah. i gotcha. sorry, its been a long day.

[blueolds01]

you should look into the 3500 uim and lim. they flow better.

[Redog]

I heard a well ported 3400 set will flow the same as the 3500 set ;)

[alerored04]

they will until you go FI that is where the 3500 stuff really shines.

[blueolds01]

I heard a well ported 3400 set will flow the same as the 3500 set ;)

but will a ported 3400 set out flow a ported 3500 set?

[alerored04]

there isnt much to port on the 3500 uim. It is just an air box with individual ports on it. All you can do is open them up. There is not enough material to require much smoothing. I am not sure on the lim and the heads. Ben at 60*v6 has flow charts if you are really interested.

[BigStribS]

www.milzymotorsports.com ! He has these parts on the shelf ready to go! Check out his site and or give him a call!

[MilzyZ34]

you should look into the 3500 uim and lim. they flow better.

the 3500 lower intake requires using the 3500 cylinder heads.

I run the company Milzy Motorsports, and have the parts you need in stock. If you have any questions, just let me know.

Mike