Lowering???

[tough_stuff_99]

Hey guys I just need some info on some issues I've had now that i lowered my car with canuck/springtech springs. Everything went smooth as far as the whole process but now that I have got it back on the road I have a strange clunking/popping noise coming from my front end when I make left and right turns????? I took everything apart and double even triple checked everything and everything is seated properly etc etc.

My question I guess is if any one else has experienced this and if so how to solve it? or what the problem is atleast?????

Thanks

[Satsuriku]

ive had same issues as well, its just the springs trying to settle in, dont worry, if its a daily driven car, it will go away within about a week or 2

[MixtapeMessiah]

if it aint that its ur upper mounts, mine does it when I turn to the left only, replace em and see hpw it goes.

[sound_xtreme]

ya, your bearing plate isnt seated with the top mount plate correctly. reseat it/them.

[AsianAlero]

do you need to take apart everything to reseat them?

[steve-o]

yes you will, and just check make sure thay are not eff. when you take them out, just give the bearing a little spin and make sure thay are smooth and easy to spin.

[sound_xtreme]

you can try jacking the car up and making several full turns on the steering wheel to reseat them. chances are though, youll have to take it all back apart.

[Gr1m]

when i put my air ride in my bearings were locked up so i put some WD40 in there and worked it out a little bit and works like a champ now:thumb: