Crank Shaft Belt Pulley Loose

[bighurtx]

I thought all I had was a bad sepentine belt but the pulley on the crank shaft moves back and forth about a 1/2" and the bolt head is snapped off. Any ideas on this one.

[alerored04]

Ouch man. What motor? Can you get a vice grips on the bolt? Or if you know someone with a welder try to weld a nut onto the bolt head. Im not too sure how strong the weld will be and if it will hold for you when trying to torque that sucker out. Good luck.

[crazyalero]

the pully has a rubber gasket in the middel.i just fixed mine.you need to get the whole pully brand new.i got it for about 100 but i think im going to upgrade it to a one pice.