Turbos

[streetracin1820]

so to all my new found alero friends, does anyone know were i can find a turbo charger for my car, i found a supercharger but ive alwasy been a bigger fan of turbos. also does anyone know were i can go to find new performance internals (cylindar heads, rods, cams whole nine yards) it seems that the performace link has a little bit of broken links :glare: well once again any info would be much appreciated

[eag182]

Donkey punch performance

But the site/store is "down" and has been for quite a while. I'm sure blackjack will chime in.

[Redog]

Nice thing about the 3400 is you can go either s/c or turbo.

Decide first, then mod your engine accordingly

I would suggest, P&P manifolds, P&P heads, larger TB, maybe a 3 inch exhaust, and if you go s/c, headers. Get the most out of your power adder :heehee:

Either way you go, get everything jet coated, you're talking about a lot of heat

[Redog]

Milzy motorsports has stage 1 and 2 cams and heads. If you go stage 2 cam, you must go stage 2 heads, the lift is too high.

They also have the P&P manifolds. Although I personally like RSM racing.com I would suggest getting the manifolds from them. This way everything is ported to match

I don't know if they have pistions and cranks.

Anyway, it's cool you are going to do it right :thumb:

www.milzymotorsports.com (http://www.milzymotorsports.com)

[strtrydr]

ROSS Racing makes pistons and Eagle makes the rods...

Just my .02...

[BlackJack]

DonkeyPunchPerformance store will continue to be non-functional for a while longer. Current orders are still being processed, but new orders will not be taken until further notice.

Reference rods, yes, you can use Eagle H-beam rods for 5.7 small journal SBC, but they have to be side-clearanced to fit between the crank.

Ross will make custom pistons to order, for our 3400's, and get ready to drop $800 for those.